MNR14E0ABJ180 Rohm Semiconductor, MNR14E0ABJ180 Datasheet - Page 2

• Manufacturer Part Number: MNR14E0ABJ180
• Description: RES ARRAY 18 OHM 8TERM 4RES SMD
• Manufacturer: Rohm Semiconductor
• Series: MNR14r

Specifications of MNR14E0ABJ180

• Resistance (ohms): 18
• Number Of Resistors: 4
• Circuit Type: Isolated
• Temperature Coefficient: ±200ppm/°C
• Tolerance: ±5%
• Power Per Element: 62.5mW
• Number Of Pins: 8
• Package / Case: 1206 (3216 Metric), Convex
• Size / Dimension: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Height: 0.020" (0.50mm)
• Mounting Type: Surface Mount
• Operating Temperature: -55°C ~ 125°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MNR14180TR

Resistors
• • • • Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
! ! ! ! Characteristics
Jumper type
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
Resistance
Rated current
Operating temperature
Resistance
Variation of resistance
with temperature
Overload
Solderability
Resistance to
soldering heat
Rapid change of
temperature
Damp heat, steady state
Endurance at 70°C
Endurance
Resistance to solvent
Bend strength of
the end face plating
Item
−55°C ∼ +125°C
Max. 50mΩ
1A
J : ±5%
± (2.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
No remarkable abnormality on the appearance.
Without mechanical damage such as breaks.
Resistor type
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Table 1
Resistance tolerance
J
Guaranteed value
(±
5%)
See Table.1
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Jumper type
2.2≤R≤10
10≤R≤1M
Resistance range
(Ω)
(E6)
(E24)
JIS C 5201-1 4.5
JIS C 5201-1 4.8
Measurement : −55 / +25 / +125°C
JIS C 5201-1 4.13
Rated voltage (current) ×2.5, 2s.
Limiting Element Voltage×2 : 100V
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s.
JIS C 5201-1 4.18
Soldering condition : 260±5°C
Duration of immersion : 10±1s.
JIS C 5201-1 4.19
Test temp. : −55°C~+125°C 5cyc
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 1,000h~1,048h
JIS C 5201-1 4.25.1
Rated voltage (current), 70°C
1.5h : ON − 0.5h : OFF
Test time : 1,000h~1,048h
JIS C 5201-1 4.25.3
125°C
Test time : 1,000h~1,048h
JIS C 5201-1 4.29
23±5°C, Immersion cleaning, 5±0.5min.
Solvent : 2-propanol
JIS C 5201-1 4.33
Test conditions (JIS C 5201-1)
Resistance temperature coefficient
(ppm / °C)
±500
±200
MNR14