58707-1 Tyco Electronics, 58707-1 Datasheet - Page 5

• Manufacturer Part Number: 58707-1
• Description: TOOL CRIMP W/DIE SET 16-20AWG
• Manufacturer: Tyco Electronics
• Series: Pro-Crimper™ III, Mini Universal MATE-N-LOK®r

Specifications of 58707-1

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• For Use With/related Products: Rectangular Contacts, 16-20 AWG
• For Use With: A34924 - CONN PIN 16-20AWG GOLD CRIMPA32447 - CONN SOCKET 16-20AWG GOLD CRIMPA28815 - CONN SOCKET 16-20AWG GOLD CRIMPA28814 - CONN SOCKET 16-20AWG TIN CRIMPA28807 - CONN PIN 16-20AWG GOLD CRIMPA28806 - CONN PIN 16-20AWG TIN CRIMPA25691 - CONN PIN 16-20AWG TIN CRIMPA25692 - CONN SOCKET 16-20AWG TIN CRIMP
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: A30726

8. MAINTENANCE
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer--replaceable parts are shown in Figure 1.
Rev A
4. Replace the lockscrew.
5. Make a sample crimp and measure the crimp
height. If the dimension is acceptable, replace and
secure the lockscrew. If the dimension is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
Tyco Electronics Corporation
Available separately, PRO--CRIMPER III Hand
Crimping Tool Repair Kit 679221--1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
11. REVISION SUMMARY
Revisions to this instruction sheet include:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105--3608
S
S
S
Changing the PRO--CRIMPER II Hand Tool to
the PRO--CRIMPER III Hand Tool;
Applying the TE logo; and
Revising the crimp--height comparator
information.
5 of 5