63819-1300 Molex Inc, 63819-1300 Datasheet - Page 7

• Manufacturer Part Number: 63819-1300
• Description: TOOL HAND CRIMP 18-24AWG RATCHET
• Manufacturer: Molex Inc
• Series: PremiumGrade™r

Specifications of 63819-1300

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Fits Cable/wire: 24-18 AWG
• Rohs Compliant: NA
• Wire Size (awg): 24-18
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• For Use With/related Products: Rectangular Contacts, 18-24 AWG
• For Use With: WM1008CT - CONN TERM FEMALE 18-24AWG GOLDWM1008TR - CONN TERM FEMALE 18-24AWG GOLD0002061101 - CONN TERM FEMALE 18-24AWG TINWM3680TR - CONN TERM MALE 18-24AWG TIN02-06-5102 - CONN TERM FEMALE 18-24AWG GOLD02-06-6102 - CONN TERM MALE 18-24AWG GOLDWM1008 - CONN TERM FEMALE 18-24AWG GOLDWM1006 - CONN TERM MALE 18-24AWG GOLDWM1001 - CONN TERM FEMALE 18-24AWG TINWM1000 - CONN TERM MALE 18-24AWG TIN
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063819-1300; 063819-1300-P; 0638191300; 0638191300-P; 63819-1300-P; 638191300; 638191300-P; WM9025

Hand Crimp Tool For Standard .062" Pin and Socket Crimp Terminals
Doc No: ATS-638191300
Revision: A
Warranty
Miscrimps or Jams
Should this tool ever become stuck or
jammed in a partially closed position,
Not force the handles open or closed.
The tool will open easily by pressing up on
the ratchet release lever in the movable
handle. See Figure 11
How to Adjust Tool Preload
(See Figure 12)
This hand tool is factory preset to 25-45
LBS. preload. It may be necessary over
the life of the tool to adjust tool handle
preload force. Listed below are the steps
required to adjust the crimping force of the hand tool to obtain proper crimp conditions:
1. Hold the hand tool in the palm of your hand as shown in Figure 12. Using the index finger squeeze the link
2. Rotate the setting wheel counter-clockwise (CCW) to increase handle force. The numbers will display higher.
3. Release the link to lock the setting wheel in place.
4. Check the crimp specifications or conduct a pull test after tool handle preload force is adjusted.
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
towards the top of the hand tool frame. This will release the preload adjustment wheel.
To decrease handle force, rotate the setting wheel clockwise (CW).
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Release Date: 01-22-08
Revision Date: 01-22-08
Do
SETTING
WHEEL
UNCONTROLLED COPY
RELEASE LEVER
RATCHET
THE HANDLE
THE LINK IN
SQUEEZE
Figure 12
TOOL IN POSITION
HOLD THE HAND
Page 7 of 9