63811-6400 Molex Inc, 63811-6400 Datasheet - Page 5

• Manufacturer Part Number: 63811-6400
• Description: TOOL HAND CRIMP 1.5MM
• Manufacturer: Molex Inc
• Series: Pico-SPOX™r
• Type: Hand Crimp Toolr

Specifications of 63811-6400

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Crimp
• Wire Gauge Range: 30 AWG to 24 AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 24-30 AWG
• For Use With: WM1112 - CONN TERM FEMALE 24-30AWG TIN
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063811-6400; 063811-6400-P; 0638116400; 0638116400-P; 63811-6400-P; 638116400; 638116400-P; WM9013

Hand Crimp Tool for
Doc No: ATS- 638116400
Revision: B
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
CAUTIONS
1. Manually powered hand tools are intended for low volume or field repair. This tool is
2. Insulated rubber handles are not protection against electrical shock.
3. Wear eye protection at all times.
4. Use only the Molex terminals specified for crimping with this tool.
Certification
Molex does not certify or re-certify commercial grade hand tools but rather supplies the following guidelines for
customers to re-certify hand tools.
production use. Repetitive use of this tool should be avoided.
This tool is qualified to pull force only. To re-certify, crimp a terminal to a wire, which has been stripped
12.7mm (1/2”) long, so there is no crimping of the insulation. Pull the terminal and wire at a rate no faster than
25mm (1.00”) per minute. See the Molex web site for the Quality Crimp Handbook for more information on pull
testing.
If the tool does not meet minimum pull force values, handle preload should be increased and the pull test
rerun, (See How To Adjust Preload).
When the hand tool is no longer capable of achieving minimum pull force, it should be taken out of service and
replaced.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
SPOX™
Release Date: 06-19-06
Revision Date: 03-29-08
Terminals
UNCONTROLLED COPY
NOT
intended for
Page 5 of 6