170-701-170-000 Norcomp Inc., 170-701-170-000 Datasheet - Page 3

• Manufacturer Part Number: 170-701-170-000
• Description: TOOL HAND CRIMP STAMPED CONTACTS
• Manufacturer: Norcomp Inc.
• Series: 170r

Specifications of 170-701-170-000

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• For Use With/related Products: D-Sub Contacts, 24-28 AWG
• For Use With: 86SE - CONN SKT STAMPED 24-28AWG 10GOLD85SE - CONN SOCKT STAMPED 24-28AWG GOLD84PE - CONN PIN STAMPED 24-28AWG 10GOLD83PE - CONN PIN STAMPED 24-28AWG GOLD82SECT - CONTACT FEMALE 24-28AWG 10GOLD82SSFECT - CONTACT FEMAL 24-28AWG GOLD FLSH82PECT - CONTACT MALE 24-28AWG 10GOLD82PSFECT - CONTACT MALE 24-28AWG GOLD FLASH82SETR - CONTACT FEMALE 24-28AWG 10GOLD82SSFETR - CONTACT FEMAL 24-28AWG GOLD FLSH82PETR - CONTACT MALE 24-28AWG 10GOLD82PSFETR - CONTACT MALE 24-28AWG GOLD FLASH
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 170701170000; T1000S

7. VISUAL INSPECTION
8. CARE OF TOOL
There is virtually no maintenance required. However,
it is a good practice to keep indenter tips free of
residual color band deposits and other debris. A
small wire brush may be used for this purpose.
WE STRONGLY RECOMMEND THAT YOU
DO NOT:
NorComp, Inc.
Charlotte, NC
THIS IS A PRECISION HAND CRIMPING TOOL
The crimping dies should be inspected on a
regular basis to ensure that they have not
become worn or damaged.
1. Clean tool die area with solvent or brush.
2. Check crimp area of die for damages.
3. If tool jams or locks, check the ratchet for
•
•
•
AND SHOULD BE HANDLED AS SUCH
DO NOT immerse tool in cleaning solution
dirt and lubrication.
immerse tool in cleaning solution
spray oil into tool to lubricate
attempt to disassemble tool or make repairs
This document is subject to change
Rev 1
170-701-170-000
11-23-09
Date Printed 11/24/2009
Instruction Sheet
Page 3 of 3
IS-170S