1579004-8 Tyco Electronics, 1579004-8 Datasheet - Page 27

• Manufacturer Part Number: 1579004-8
• Description: TOOL HAND CRIMP SOLARLOK
• Manufacturer: Tyco Electronics
• Series: Solarlok®r

Specifications of 1579004-8

• Tool Type: Crimp Tool
• Features: Side Entry, Ratchet
• For Use With/related Products: Heavy Duty Contacts, 10-15.5 AWG
• For Use With: 5-1105301-1 - HVT-C-BU.AG.4,0 QMM4-1105301-1 - HVT-C-BU.AG.2,5 QMM5-1105300-1 - HVT-C-STI.AG.4,0 QMM4-1105300-1 - HVT-C-STI.AG.2,5 QMM3-1105300-1 - HVT-C-STI.AG.1,5 QMM3-1105301-1 - CONN SOCKET 15.5 AWG CRIMP SIVER
• Lead Free Status / RoHS Status: Not applicable / Not applicable

SOLARLOK Interconnection System
Assembly and Installation Guidelines
When assembling the connectors, the following sequence must be followed:
1 Stripping the Wire (please refer to application specification # 114-74013)
2 Insert the stripped wire into the wire crimp barrel until it stops.
3 Place seal/pinch ring combination into the connector housing until it stops.
4 Place backshell onto the connector housing.
5 Push contact with cable into the connector housing until you hear the contact is locked into position
6 Tighten backshell nut to 1.5 Nm
All specifications subject to change. Consult Tyco Electronics for latest specifications.
While holding the wire in place, squeeze tool handles together until ratchet releases.
8,0 mm
(continued)
Catalog 889753-3
Revised 6-2008
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
25