58587-1 Tyco Electronics, 58587-1 Datasheet - Page 5

no-image

58587-1

Manufacturer Part Number
58587-1
Description
TOOL HAND CRIMP W/DIE 18-22AWG
Manufacturer
Tyco Electronics
Datasheet

Specifications of 58587-1

Lead Free Status / RoHS Status
Not applicable / Not applicable
Features
-
For Use With/related Products
-
Tool Type
-
8. MAINTENANCE
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
Rev B
PRO-CRIMPER III Hand Crimping Tool Assembly 58587-1
4. Replace the lockscrew.
5. Make a sample crimp and measure the crimp
height. If the dimension is acceptable, replace and
secure the lockscrew. If the dimension is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
Tyco Electronics Corporation
10. REPLACEMENT
Customer–replaceable parts are shown in Figure 1. If
the dies are damaged or worn excessively, they must
be replaced.
Available separately, PRO–CRIMPER III Hand
Crimping Tool Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
11.REVISION SUMMARY
Since the previous release of this instruction sheet:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105–3608
S The PRO–CRIMPER II Hand Tool was
S The TE logo was added; and
S The format was updated to the current
changed to the PRO–CRIMPER III Hand Tool;
corporate requirements.
408-4206
5 of 5