58522-2 Tyco Electronics, 58522-2 Datasheet - Page 5

• Manufacturer Part Number: 58522-2
• Description: TOOL DIE ASSEM FOR 58522-1
• Manufacturer: Tyco Electronics
• Series: Pro-Crimper™ IIIr

Specifications of 58522-2

• Connector Type: Crimp Terminals
• Crimp Handle: A9996-ND
• Crimp Or Cable Size: 20-22 AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable

8. MAINTENANCE
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer--replaceable parts are shown in Figure 1.
Available separately, PRO--CRIMPER III Hand
Crimping Tool Repair Kit 679221--1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Rev C
Tyco Electronics Corporation
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
11.REVISION SUMMARY
Revisions to this instruction sheet include:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105--3608
S
S
S
S
S
Changed PRO--CRIMPER II Hand Tool to
PRO--CRIMPER III Hand Tool;
Updated crimp--height inspection information;
Applied TE logo;
Updated format to current corporate
requirements; and
Added back page, indicating other tooling
available for die assembly 58522--2.
5 of 6