58564-1 Tyco Electronics, 58564-1 Datasheet - Page 5

• Manufacturer Part Number: 58564-1
• Description: PRO-CRIMPER HT W/DIE UNIV POWR
• Manufacturer: Tyco Electronics

Specifications of 58564-1

• Lead Free Status / RoHS Status: Not applicable / Not applicable

8. MAINTENANCE
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer–replaceable parts are shown in Figure 1.
Available separately, PRO–CRIMPER III Hand
Crimping Tool Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs. If the dies are damaged or worn
excessively, they must be replaced. Order the repair
kit and replaceable parts through your Tyco
Electronics representative, or call 1–800–526–5142,
or send a facsimile of your purchase order to
1–717–986–7605, or write to:
Rev B
PRO-CRIMPER III Hand Crimping Tool Assembly 58564-1
Tyco Electronics Corporation
11.REVISION SUMMARY
Since the previous release of this instruction sheet,
the following changes were made
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105–3608
S TE logo was applied;
S PRO–CRIMPER II was changed to
S The format was updated to the current
PRO–CRIMPER III; and
corporate requirements.
408-4075
5 of 5