2912520-01 Stewart Connector, 2912520-01 Datasheet - Page 2

• Manufacturer Part Number: 2912520-01
• Description: TOOL FERRULE STN INSRT .150-.179
• Manufacturer: Stewart Connector

Specifications of 2912520-01

• For Use With: 2940211-01 - TOOL HAND FERRULE NO INSERTS/DIE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1. Position “Stationary Crimp Insert” as shown.
2. Install “Insert” with screw. Use 2.5mm Allen wrench.
3. Position “Ram Crimp Insert” as shown.
4. Place “Insert” on hand tool label side & position “Locator
5. Install “Insert” & “Plate” with screw. Use 2.5mm Allen wrench.
Plate” on opposite side.
ASSEMBLY INSTRUCTIONS
(See chart on
Crimp Insert
1
29125xx-01
back page)
Stationary
4
Locator Plate
(See chart on
29125xx-01
back page)
2
(See chart on
29125xx-01
back page)
Insert
Ram
5
3
This tool incorporates an eccentric axle
and an adjustment wheel to adjust and re-
calibrate to ensure correct crimp
performance.
Should adjustment be necessary, the
following procedure should be followed:
1. Loosen and remove the
2. Using a screw driver, turn the
3. Re-install the Combination Head
Combination Head screw (A).
numbered adjustment wheel to
the next higher/lower number (B).
Screw and tighten.
A
B