600769-1 Tyco Electronics, 600769-1 Datasheet

Manufacturer Part Number

600769-1

Description

TOOL HAND BATTERY CABLE CUTTER

Manufacturer

Tyco Electronics

Datasheet

1.600769-1.pdf (1 pages)

Lead Free Status / RoHS Status

Not applicable / Not applicable

Dimensions in this instruction sheet are in metric

units [with U.S. customary units in brackets].

Figure is not drawn to scale.

Figure 1

Heavy–Duty Cable Cutter Hand Tool 600769–1

(Model CCS–27) is designed to cut aluminum or

copper electrical cable up to size 500 MCM [253

The tool will also cut steel cable up to size 500 MCM

with hardness not exceeding Brinell 400 or

Rockwell 042.

Both blades are made of a high grade steel alloy, and

the handle assembly is made of lightweight tubular

steel and has rubber hand grips.

Inspect the tool to ensure it conforms to the

dimension shown in Figure 1.

Revisions to this instruction sheet include:

1. Select the cable, and mark the location that the

cable is to be cut.

2. Place the cutting blades over the location mark,

and close the tool handles.

1. After use, clean and lightly oil the cutting blades

prior to storage.

2. Nicks and minor damage to the cutting blades

can be repaired by filing and stoning along the

beveled and flat surfaces of the blades.

3. In the event of major damage, the tool should be

replaced. There are no replaceable parts.

] with conductor diameter of 20.7 mm [.82 in.].

Updated document to corporate requirements

Steel or aluminum conductor steel reinforced

(ACSR) cable with hardness exceeding Brinell

400 or Rockwell 042 will permanently damage

the cutting blades.

Make sure power to cable is DISCONNECTED.

Keep hands away from the cutting blades.