GT-70 Master Appliance Co, GT-70 Datasheet - Page 2

• Manufacturer Part Number: GT-70
• Description: GEN IND TORCH BUTANE PWR
• Manufacturer: Master Appliance Co
• Type: Butane Torchr

Specifications of GT-70

• Temperature Range: 2500°F (1371°C)
• Features: 80 ml Refillable Fuel Tank, Child Resistant (Compliant with CPSC Regulations)
• Temperature Max: 1300°C
• Run Time: 30min
• Fuel Capacity: 80ml
• Weight: 280g
• External Height: 155mm
• External Width: 45mm
• External Depth: 140mm
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Voltage: -
• Power - Rated: -
• Lead Free Status / RoHS Status: na, Not applicable / Not applicable

THE GT-70 INDUSTRIAL TORCH DOES NOT CONTAIN BUTANE GAS WHEN PURCHASED
GAS REFILLING
• Use only Master Ultratane™ Butane Fuel.
• Shake gas container a few times to warm fuel up.
• Make sure the Fuel Adjustment Knob is in the “OFF” position (fully clockwise).
• Insert the Butane container nozzle tip vertically down into the unit gas valve
• After filling, allow a few minutes for the gas to stabilize.
IGNITION
• Turn the Fuel Adjustment Knob counter-clockwise 1 full turn. (Figure 2)
• To Ignite: Push Safety Slide Bar up and hold while depressing Ignition
• For Hands Free Mode: Push Hands Free ON/OFF slide switch foreword
• Note: It is sometimes difficult to ignite when the Air Control Ring covers
FLAME ADJUSTMENT
• Adjust the torch flame length by turning the Fuel Adjustment Knob (+) (-)
• Turn the Air Control Ring forward to convert the blue pinpoint flame to a
STORAGE
• Turn the Fuel Adjustment Knob clockwise to “OFF” position until snug.
• To prevent gas leakage make sure Hands Free ON/OFF Slide switch is
WARNINGS:
1. Read Instructions Before Operation.
2. Keep out of reach of children.
3. Do not touch flame guard when HOT!
4. Use only Master Ultratane™ Butane Fuel. Butane gas is extremely flammable, please handle
5. Always point away from your face, eyes, and body when igniting or during operation.
6. Do not store under direct sunlight or anywhere temperature will exceed 104°F/40°C.
7. Make sure the Fuel Adjustment Knob is firmly closed (Figure 2) and flame is completely
8. After using let tool cool down before storing.
9. Keep the nozzle clean from dust and do not drop the torch as these may cause malfunctions.
10. Do not continually use this tool for over 1 hour.
11. Never puncture or dispose of in a fire.
12. Read and follow all instructions and cautions on the fuel canister.
WARNING: This product, when used for soldering and similar applications, produces chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm.
WARNING: The Department of Transportation Hazardous Material Regulations forbid carriage of
butane or other flammable gas products on passenger aircraft. Do not pack this item or any other
flammable gas item, in any checked or carry-on baggage.
Contains flammable gas under pressure. Do not use near sparks or open flame. Do not puncture
or incinerate container or store at temperatures above 120° F. Keep out of reach of children.
soft/cooler flame. CAUTION: Air Control Ring can be very hot.
refill opening. Use a pumping action for best results (Figure 1).
(Figure 2). Don’t make the flame too long as it will only waste the gas and
make the flame unstable.
Let tool cool down before storing.
returned completely to “OFF” position.
Trigger (Figure 3). When you remove pressure from the ignition trigger,
unit will shut off instantly.
while depressing trigger (Figure 4). To shut off unit, return slide switch to
“OFF” position.
the air control holes. Adjust Accordingly.
with care.
extinguished after using.
FERMÉ
DESACTIVADO
OFF
L O C
L O C
K
K
ON
ENGAGÉ
ACTIVADO
4
2
3
1