543382-6 Tyco Electronics, 543382-6 Datasheet - Page 4
543382-6
Manufacturer Part Number
543382-6
Description
TOOL INSERT/EXTRACT TIP 25-KIT
Manufacturer
Tyco Electronics
Series
AMPLIMITE®r
Type
Insertion / Extraction Toolsr
Specifications of 543382-6
Tool Type
Insertion/Extraction Tool Tip
Product
Extraction Tool
For Use With
Posted HD20 Contacts
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
D-Sub Terminals
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
4.4. Extracting A Posted Contact
Rev B
Contact
Cavity
1. Place the extraction tip over the contact post.
Move the tool along the post until the tip enters the
contact cavity.
2. Align the groove of the extraction tip with the
contact stabilizer as shown in Figure 6.
3. Push the tip past the stabilizer and straight into
the cavity until it bottoms.
4. For a receptacle style connector, insert a 1.02
mm [.040 in.] diameter pin straight into the FRONT
of the contact cavity. For a plug style connector,
push on mating tip of contact with a suitable device.
5. Apply pressure to remove the contact and tool
from the contact cavity.
Insertion Tip
(Figure 6)
Back of Connector (Ref)
Figure 5
Contact Post
5. TOOL INSPECTION/REPLACEMENT
Insertion/Extraction Tool is inspected before shipment.
Tyco Electronics recommends that the tool be
inspected immediately upon its arrival to ensure that
the tool has not been damaged during shipment, and
that the tool conforms to the dimensions provided in
Figure 7.Customer-replaceable parts are provided in
Figure 7. If the tool becomes broken or damaged,
replacement and/or spare parts can be purchased by
contacting:
For tool repair service, please contact an Tyco
Electronics Representative at 1-800-526-5136.
6. REVISION SUMMARY
Since the previous release, the TE Connectivity logo
has been applied.
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
Butt Tool Tip
Against Contact
Stabilizer
(Figure 7)
408-9404
4 of 6