N 45 091 0001 Amphenol-Tuchel Electronics, N 45 091 0001 Datasheet - Page 4

• Manufacturer Part Number: N 45 091 0001
• Description: TOOL WRENCH RECEPT SPANNER
• Manufacturer: Amphenol-Tuchel Electronics

Specifications of N 45 091 0001

• Tool Type: Insertion/Extraction Tool
• For Use With/related Products: Circular Connectors
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 361-1145; N 45 091 0001; N-45-091-000-1

1)
4
Style
Male cable connector
Female cable connector
Male receptacle
Female receptacle
C 091
Remarks
Safety classification
A Connections to and from a device equipment
1. General Remarks
These connectors are designed and produced in conformity with the low voltage directive (72/23/EWG) respectively Gerätesicherheitsgesetz (German law).
We reserve the right to change the design due to improvement in quality, development or production requirements.
These connectors and/or plug and socket devices are designed and produced according to DIN VDE 57627.
All technical data refer to mated connectors under live conditions. The safety of the connector system depends on the correct selection of products, proper
assembly of the connector device, and a precise fit of the connectors.
2. Application Remarks
Connectors and/or plug and socket devices must be used according to specified technical ratings.
The technical data represent the initial value of mated parts under predetermined conditions and length of time.These values could change with different
test parameters or product requirements.
The C 091 Series connectors are used in a wide variety of industries and equipment. Some of these include industrial machines and controls, data
processing, instrumentation and test equipment, medical devices, telecommunication’s network and equipment, plus outdoor and marine applications.
All rated data for the connectors listed in this catalog are based on over-voltage category and pollution degree for electronic applications. Connectors were
completely mated according to their respective safety locking mechanism. Selection and testing of connectors and/or plug and socket devices to
meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user.
3. Assembling Remarks
Certain appliances and equipment include protective measures that relate to the coupling devices of the male and female receptacle housings.
(see also DIN VDE 0100 part 410; IEC 60364-4-41).
Care must be taken to insure the parts are correctly mated and screws are tightened with the proper torque.
4. Termination Remarks
Cable connectors are effectively secured when using the internal cable clamp. When the connector contains a simple gland bushing for retention the cable
should have a strain relief close behind the connector. All cable properties or specifications must be compatible with the connector design and materials.
Designated wire conductors must be terminated to the correct poles in the connector.
Crimp contacts must be fully inserted into the plastic housing and retention assured with a slight tug on the wire.
Wire should be stripped correctly according to printed specifications to ensure no electrical contact can be made between the conductors. There should be
no nicked or cut strains during the stripping action.
5. Safety Classification acc. to DIN VDE 0627
X
X
X
X
A
Safety classification
X
X
X
X
B
B Connections within a device equipment
C
X
X
1)
free
X
X
Connectors
fixed
X
X
with
Protective earth
contact
without
X
X
X
X
C Free cable connections
mated
X
X
X
X
Protection against
electric shock
unmated
X
X
with
X
X
Cable clamp
Amphenol
without
X
X
X
X