107484-002 FCI, 107484-002 Datasheet - Page 4

• Manufacturer Part Number: 107484-002
• Description: TOOL HAND PRESS IDC QUICKIE
• Manufacturer: FCI
• Type: Press Assemblyr

Specifications of 107484-002

• Tool Type: Press, Manual
• Product: Tool Component
• Description/function: Hand press assembly
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 17484-002; 609-1781

Introduction
General Description
Installation
Receiving
Set-up
Service
Service
Parts Replacement
FCI Communications, Data & Consumer Division
Issued: (01/15/92)
Rev. 02/13/02
Upon arrival, remove the QP-104 hand press from the shipping crate, and inspect immediately for
shipping damage. Report any damage to a FCI USA representative, and file a damage claim with
the carrier.
The QP-104 should be securely mounted to an adequate work bench top with ¼ inch bolts, washers,
and nuts.
Once a month, the bearings, toggle joints and ram shaft should be lubricated with 20w oil.
WHAT TO DO IF YOU NEED SERVICE:
PARTS REPLACEMENT:
The QP-104 press is a hand-operated press. The use of a toggle linkage is utilized to produce
the force needed to do crimping.
In the event service or technical help is needed FCI USA provides a toll free number. For service or
technical help call 1-800-843-6911.
When calling for spare parts, have part number(s) ready for the customer service person. Number(s) can
be obtained from the reference drawings located in the back of this manual.
Spare part orders call 1-800-222-2194 and ask for CUSTOMER SERVICE.
ECR V20325
PDM: Rev:C
STATUS:
Released
Manual Part No. 162046-001
Printed: Jan 18, 2003
Page 4 of 4
Revision C