679980-2 Tyco Electronics, 679980-2 Datasheet - Page 2

• Manufacturer Part Number: 679980-2
• Description: FIXTURE BOARD SUPPORT
• Manufacturer: Tyco Electronics

Specifications of 679980-2

• Lead Free Status / RoHS Status: Not applicable / Not applicable

The side locators (items 4 and 9) located on item 8,
are positioned in the adaptor (item 2) to
accommodate the width of the pc board. Then the
anvil or anvils (item 6) which match the connector are
positioned in the adapter (item 2). Set screws (item 7)
retain anvils. The board standoffs (items 13 and 14)
are positioned to balance and support the board.
A commercially available machine with appropriate
capacity can be used for pressing receptacle
connectors or shields into a board. Tyco Electronics
offers pneumatic and hydraulic machines for high
volume applications.
SM–3 Machine 814700–2 is a pneumatic machine
capable of applying 26,689 N [6000 lb] force. Below
are the features:
of 3
– The fixtures include bottom side clearance and
support tooling for the connector leads and
retention features.
– The front edge of the board is positioned by the
board locator features and the bottom side of the
pc board is supported by anvils along with
adjustable standoffs. These standoffs can be
moved into various support positions that do not
interfere with components on the bottom side of
the pc board.
– The board and connector are placed on the
fixture, which is then slid under the press and
under the flat metal bar. Press actuation inserts the
connector into the board.
– Table top unit: 673 mm H x 902 mm L x
584 mm W [26.5 in. H x 35.5 in. L x 23 in. W];
Weight 132 kg [290 lb.].
– Two pushbuttons must be depressed to actuate
the machine.
– Totally pneumatic – air requirement is 552 kPa
[80 psi].
– PC board thickness and ram height controlled
manually in conjunction with either board or
pressure sensing.
– Accepts 457.2 mm X 609.6 mm [18 in. X 24 in.]
board size.
– Cycle time of 4 seconds.
(Figure 3)
Tyco Electronics Corporation
For additional information, order customer manual
409–5626.
H–Frame Machine 803880–6 is a hydraulically–
operated machine capable of applying 177,929 N
[40,000 lb] force. Below are the features:
For additional information, order customer manual
409–5567.
Tyco Electronics sells adapter kits for use with the
Greenerd frame assemblies 3A and 3B. The arbor
presses are manually operated and can apply a force
of 26,689 N [6000 lb]. The kit includes a ram adapter
assembly kit, a counterbalance kit, and a board
support plate. See instruction sheet 408–9027 for
additional information. For more information on the
Greenerd presses, contact:
The parts listed in Figure 3 are customer–
replaceable. A complete inventory can be stocked
and controlled to prevent lost time when replacement
of parts is necessary. Order replacement parts
through your Tyco Electronics Representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
Tools may also be returned for evaluation and repair.
For tool repair service, contact a Tyco Electronics
Representative at 1–800–526–5136.
Since the previous release of this document, the
following additions were made:
– 1.96 m H x 1.85 m L x 1.14 m W [77 in. H x
73 in. L x 45 in. W]; Weight 991 kg [2185 lb].
– Two pushbuttons must be depressed to actuate
the machine.
– Accepts 1.09 m x 1.14 m [43 in. x 45 in.] board
size.
– Cycle time of 2 to 2.5 seconds.
Greenerd Press and Machine Co., Inc.
41 Crown Street
Nashua, NH 03061
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG PA 17105–3608
Updated document to corporate requirements
ev