EEF-WA1A121P Panasonic - ECG, EEF-WA1A121P Datasheet - Page 18

• Manufacturer Part Number: EEF-WA1A121P
• Description: CAP 120UF 10V SPEC POLYMER SMD
• Manufacturer: Panasonic - ECG
• Series: SP-Cap WAr

Specifications of EEF-WA1A121P

• Capacitance: 120µF
• Voltage Rating: 10V
• Tolerance: ±20%
• Lifetime @ Temp.: 2000 Hrs @ 105°C
• Operating Temperature: -55°C ~ 105°C
• Features: Polymer
• Ripple Current: 2.8A
• Esr (equivalent Series Resistance): 35.0 mOhm
• Mounting Type: Surface Mount
• Package / Case: Radial, Can - SMD
• Size / Dimension: 0.315" Dia (8.00mm)
• Height: 0.276" (7.00mm)
• Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Spacing: -
• Other names: EEFWA1A121P; PCE2136TR

Specialty Polymer Aluminum Electrolytic Capacitors (V type WA series)
Design, Specifications are subject to change without notice.
about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.
8. Capacitor Disposal
9 . Circuit Board Cleaning
6. Long Term Storage
7. Transportation
When products absorb the excessive moisture, heat stress while soldering might cause
the damage to resin seal.
Therefore, it is desirable to keep storage conditions below.
Products are packed in an moisture proof package.
Handle with care as excessive vibration or shock may degrade reliability of the capacitor.
Preferred storage conditions
Leakage current of a capacitor increases with long storage times.
The aluminum oxide film deteriorates as a function of temperature and time.
If used without reconditioning, an abnormally high current will be required to
restore the oxide film.
This current surge could cause the circuit or the capacitor to fail.
Therefore, capacitors should be used within 12 months.
Since capacitors are composed of various metals and resins, treat them as industrial
waste when arranging for their disposal.
(ultrasonic cleaning is available).
Be sure to sufficiently wash (about 3 min. with water) and dry (20min. at 100°C)the
board afterward.
[Recommended cleaning solvents include]
Pine Alpha ST-100S, Sunelec B-12, DK beclear CW-5790, Aqua Cleaner 210SEP, Cold
Cleaner
P3-375, Telpen Cleaner EC-7R, Clean-thru 750H, Clean-thru 750L, Clean-thru710M, Techno
Cleaner 219, Techno Care FRW-17, Techno Care FRW-1, Techno care FRV-1
*The use of ozone depleting cleaning agents are not recommended in the interest of
Capacitors can withstand immersion in solvent at 60°C or under for up to 5 minutes
protecting the environment.
Temperature : 5 to 30°C without direct sunlight
Humidity
Electrolytic Capacitor Product Specification
: Less than 70%RH
LCR Device Company Capacitor Business Unit
Matsushita Electronic Components Co., Ltd.
Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use.
WA-E-0016
Whenever any doubt
16