1210ZD226KAT2A AVX Corporation, 1210ZD226KAT2A Datasheet - Page 11

• Manufacturer Part Number: 1210ZD226KAT2A
• Description: CAP CERM 22UF 10% 10V X5R 1210
• Manufacturer: AVX Corporation
• Series: 1210r

Specifications of 1210ZD226KAT2A

• Capacitance: 22µF
• Tolerance: ±10%
• Package / Case: 1210 (3225 Metric)
• Voltage - Rated: 10V
• Temperature Coefficient: X5R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 85°C
• Applications: General Purpose
• Size / Dimension: 0.126" L x 0.098" W (3.20mm x 2.50mm)
• Thickness: 2.79mm Max
• Voltage Rating: 10 Volts
• Operating Temperature Range: - 55 C to + 85 C
• Temperature Coefficient / Code: X5R
• Product: General Type MLCCs
• Dimensions: 2.5 mm W x 3.2 mm L x 2.79 mm H
• Dissipation Factor Df: 5
• Termination Style: SMD/SMT
• Dielectric Characteristic: X5R
• Capacitance Tolerance: ± 10%
• Capacitor Case Style: 1210
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Case Size: 1210
• Material, Element: Ceramic
• Termination: SMT
• Voltage, Rating: 10 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Ratings: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 478-1632-2

General Description
Table 1: EIA and MIL Temperature Stable and General
In specifying capacitance change with temperature for Class
2 materials, EIA expresses the capacitance change over an
operating temperature range by a 3 symbol code. The first
symbol represents the cold temperature end of the temper-
ature range, the second represents the upper limit of the
operating temperature range and the third symbol repre-
sents the capacitance change allowed over the
operating temperature range. Table 1 provides a detailed
explanation of the EIA system.
66
Percent Capacity Change Over Temperature Range
EXAMPLE – A capacitor is desired with the capacitance value at 25°C
to increase no more than 7.5% or decrease no more than 7.5% from
-30°C to +85°C. EIA Code will be Y5F.
Temperature characteristic is specified by combining range and
change symbols, for example BR or AW. Specification slash sheets
indicate the characteristic applicable to a given style of capacitor.
Symbol
Symbol
RS198
C
Code
A
B
W
R
S
X
Y
Z
X7
X6
X5
Y5
Z5
Application Codes
U
D
E
P
R
S
V
F
T
Cap. Change
+15%, -15%
+22%, -22%
+22%, -56%
+15%, -15%
+30%, -70%
+20%, -20%
Zero Volts
Temperature Range
MIL CODE
EIA CODE
Percent Capacity Change
-55°C to +85°C
-55°C to +125°C
-55°C to +150°C
Temperature Range
+10°C to +85°C
-55°C to +125°C
-55°C to +105°C
-55°C to +85°C
-30°C to +85°C
+22%, - 56%
+22%, -33%
+22%, -82%
±3.3%
±4.7%
±7.5%
±10%
±15%
±22%
Cap. Change
+15%, -40%
+22%, -56%
+22%, -66%
+15%, -25%
+30%, -80%
+20%, -30%
Rated Volts
Effects of Voltage – Variations in voltage have little effect
on Class 1 dielectric but does affect the capacitance and
dissipation factor of Class 2 dielectrics. The application of
DC voltage reduces both the capacitance and dissipation
factor while the application of an AC voltage within a
reasonable range tends to increase both capacitance and
dissipation factor readings. If a high enough AC voltage is
applied, eventually it will reduce capacitance just as a DC
voltage will. Figure 2 shows the effects of AC voltage.
Capacitor specifications specify the AC voltage at which to
measure (normally 0.5 or 1 VAC) and application of the
wrong voltage can cause spurious readings. Figure 3 gives
the voltage coefficient of dissipation factor for various AC
voltages at 1 kilohertz. Applications of different frequencies
will affect the percentage changes versus voltages.
Typical effect of the application of DC voltage is shown in
Figure 4. The voltage coefficient is more pronounced for
higher K dielectrics. These figures are shown for room tem-
perature conditions. The combination characteristic known
as voltage temperature limits which shows the effects of
rated voltage over the operating temperature range is
shown in Figure 5 for the military BX characteristic.
10.0
50
40
30
20
10
6.0
8.0
4.0
2.0
0
0
Curve 1 - 100 VDC Rated Capacitor
Curve 2 - 50 VDC Rated Capacitor
Curve 3 - 25 VDC Rated Capacitor
D.F. vs. A.C. Measurement Volts
Cap. Change vs. A.C. Volts
.5
AC Measurement Volts at 1.0 KHz
12.5
Volts AC at 1.0 KHz
1.0
Figure 2
Figure 3
X7R
X7R
25
1.5
2.0
37.5
2.5
Curve 3
Curve 1
Curve 2
50