CKG45NX7R2A475M TDK Corporation, CKG45NX7R2A475M Datasheet - Page 11

• Manufacturer Part Number: CKG45NX7R2A475M
• Description: CAP CER 4.7UF 100V X7R STCKD SMD
• Manufacturer: TDK Corporation
• Series: CKGr

Specifications of CKG45NX7R2A475M

• Capacitance: 4.7µF
• Tolerance: ±20%
• Voltage - Rated: 100V
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Stacked
• Applications: Automotive
• Package / Case: Non-Standard SMD
• Size / Dimension: 0.217" L x 0.158" W (5.50mm x 4.00mm)
• Thickness: 5.50mm Max
• Voltage Rating: 10 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Temperature Coefficient / Code: X7R
• Product: Low ESR MLCCs
• Dimensions: 4 mm W x 5.5 mm L x 5.5 mm H
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 445-4095-2

• All specifications are subject to change without notice. Please read the precautions before using the product.
No.
14
15
*As for the initial measurement of capacitors on number 6 and 10, leave capacitors at 150 —10, 0°C for 1 hour and
measure the value after leaving capacitors for 24±2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X5R/X7R/X7S/X7T:
200% of initial spec. max.
25MΩ•μF min.
(As for the capacitors of rated voltage
16V DC, 5MΩ•μF min.).
No mechanical damage.
Characteristics
X5R/X7R/X7S/X7T:
200% of initial spec. max.
50MΩ•μF min.
(As for the capacitors of rated voltage
16V DC, 10MΩ•μF min.).
Characteristics
Characteristics
X5R
X7R
X5R
X7R
X7S
X7T
X7S
X7T
CKG Series — Mega Cap Type Capacitors
Change from the
value before test
± 12.5 %
Change from the
value before test
± 15 %
Test or Inspection Method
Reflow solder the capacitors on a P.C. board (shown in
Appendix 1) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500+24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitors on a P.C. Board shown in
Appendix 1 before testing.
Below the voltage shall be applied at Maximum
operating temperature ±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2x RV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 24±2h
before measurement.
Voltage conditioning:
Voltage treat the capacitors under testing temperature
and voltage for 1 hour.
Leave the capacitors in ambient condition for 24±2h
before measurement.
Use this measurement for initial value.
US Catalog // CKG Series — Mega Cap Type // Version A11