S221K25Y5PP63K5R Vishay, S221K25Y5PP63K5R Datasheet - Page 9

• Manufacturer Part Number: S221K25Y5PP63K5R
• Description: CAP CER 220PF 2000V Y5P 10% DISC
• Manufacturer: Vishay
• Series: Sr

Specifications of S221K25Y5PP63K5R

• Capacitance: 220pF
• Voltage - Rated: 2000V (2kV)
• Tolerance: ±10%
• Temperature Coefficient: Y5P (B)
• Mounting Type: Through Hole
• Operating Temperature: -30°C ~ 85°C
• Features: High Voltage
• Applications: General Purpose
• Package / Case: Radial - Disc
• Size / Dimension: 0.256" Dia (6.5mm)
• Thickness: 4.00mm Max
• Lead Spacing: 0.197" (5.00mm)
• Lead Style: Kinked
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Other names: 1271PH

General Information
Vishay BCcomponents
STORAGE
he capacitors must not be stored in a corrosive atmosphere, where sulphide or chloride gas, acid, alkali or salt are present.
Exposure of the components to moisture, should be avoided. The solderability of the leads is not affected by storage of up to
24 months (temperature + 10 °C to + 40 °C, relative humidity up to 60 % RH). Class 2 Ceramic Dielectric Capacitors are also
subject to aging see previous page.
SOLDERING
SOLDERING RECOMMENDATIONS
Soldering of the component should be achieved using a Sn96.5/Ag3.0/Cu0.5, a Sn60/40 type or a silver-bearing Sn type solder.
Ceramic capacitors are very sensitive to rapid changes in temperature (Thermal shock) therefore the solder heat resistance
specification (see above table) should not be exceeded. Subjecting the capacitor to excessive heating may result in thermal
shocks that can crack the ceramic body. Similarly, excessive heating can cause the internal solder junction to melt.
CLEANING
The components should be cleaned immediately following the soldering operation with vapor degreasers
SOLVENT RESISTANCE
The coating and marking of the capacitors are resistant to the following test method:
IEC 60068-2-45 (Method XA)
MOUNTING
We do not recommend modifying the lead terminals, e.g. bending or cropping. This action could break the coating or crack the
ceramic insert. If however, the lead must be modified in any way, we recommend support of the lead with a clamping fixture
next to the coating.
www.vishay.com
10
SOLDERING SPECIFICATIONS
Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method)
Soldering Temperature
Soldering Duration
Distance from Component Body
For technical questions, contact:
Ceramic Disc, RFI and Safety Capacitors
SOLDERABILITY
(235 ± 5) °C
(2 ± 0.5) s
2 mm
[e-mail]
RESISTANCE TO SOLDERING HEAT
(260 ± 5) °C
(10 ± 1) s
Document Number: 28536
5 mm
Revision: 07-Jan-10