10034908-001LF FCI, 10034908-001LF Datasheet - Page 3

• Manufacturer Part Number: 10034908-001LF
• Description: CONN PWR CARD EDGE 38POS DL
• Manufacturer: FCI

Specifications of 10034908-001LF

• Card Type: Dual Edge
• Card Thickness: 0.062" (1.57mm)
• Gender: Female
• Number Of Positions: 38
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Mounting Type: Board Edge, Straddle Mount
• Features: Card Extender, Card Specific, Flange
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black
• Number Of Positions / Contacts: 38
• Mounting Angle: Vertical
• Mounting Style: Screw
• Housing Material: Thermoplastic, High Temperature
• Contact Material: Copper Alloy
• Contact Plating: Gold over Nickel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 10034908-001LF; 609-2862

6.0
7.0
TITLE
Copyright 2001 FCI USA, INC.
Form E-3334 02/12/01
6.4
ELECTRICAL CHARACTERISTICS
6.1
6.2
6.3
MECHANICAL CHARACTERISTICS
7.1
Straddle mount type Power edge connector
system when one pair of blade module contacts are powered to 20 amperes. One blade module are
system when the other pair contacts are powered at 7.0 amperes.(refer to para. 10.0 layout drawing)
The following details shall apply:
Current Rating - The temperature rise above ambient shall not exceed 30 o C at any point in the
Low Level Contact Resistance (LLCR) - The low level contact resistance shall not exceed 20 milliohm
after environmental exposure when measured in accordance with EIA 364 TP 06. The following details
shall apply:
Insulation Resistance - the insulation resistance of mated connectors shall not be less than 5,000
megohms for power contacts, and 500 megohms for signal initially and after environmental exposure
when measured in accordance with EIA 364 TP21
Dielectric Withstanding Voltage - There shall be no evidence of arc-over, insulation breakdown, or
excessive leakage current (>1 Milliampere ) when mated connectors are tested in accordance with EIA
364 TP 20. The following details apply:
a.
b.
constituted by 3 pins. The temperature rise above ambient shall not exceed 30 o C at any point in the
d.
e.
a.
Mating/Unmating Force - The force to mate a receptacle connector and PCB header shall not exceed
8.0 Kgf. The unmating force shall not be less than 1.2 Kgf.
The following details shall apply:
a.
b.
c.
b.
a.
b.
c.
a.
b.
c.
d.
Test Voltage 500 volts DC
Electrification time - 2 minutes
Points of Measurement - Between adjacent Contacts
Test Voltage – 1000 Volts, AC.
Test Duration – 60 seconds.
Test Condition – (760 Torr – sea level).
Points of measurement – between adjacent contacts
Ambient conditions - Still air at 25°C
Reference – FCI Test Specification BUS-03-601.
Test Voltage – 20 millivolts DC max open circuit.
Test Current - Not to exceed 100 milliamps.
Lubrication - None
Cross Head Speed - 1 inch per minute
Utilize free floating fixtures
Reference EIA 364-13
Test PCB thickness is 1.57+/-0.13mm (inclusive of two pads).
TYPE
PRODUCT SPECIFICATION
PDM: Rev:E
STATUS:
NUMBER
PAGE
AUTHORIZED BY
Ryan Yuan
CLASSIFICATION
3 of 11
Released
CONFIDENTIAL
GS-12-279
REVISION
DATE
Printed: May 26, 2010
07/04/06
E
GS-01-001
.