10034908-001LF FCI, 10034908-001LF Datasheet - Page 6

• Manufacturer Part Number: 10034908-001LF
• Description: CONN PWR CARD EDGE 38POS DL
• Manufacturer: FCI

Specifications of 10034908-001LF

• Card Type: Dual Edge
• Card Thickness: 0.062" (1.57mm)
• Gender: Female
• Number Of Positions: 38
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Mounting Type: Board Edge, Straddle Mount
• Features: Card Extender, Card Specific, Flange
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black
• Number Of Positions / Contacts: 38
• Mounting Angle: Vertical
• Mounting Style: Screw
• Housing Material: Thermoplastic, High Temperature
• Contact Material: Copper Alloy
• Contact Plating: Gold over Nickel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 10034908-001LF; 609-2862

9.0
10.0 Reference Documents
TITLE
Copyright 2001 FCI USA, INC.
Form E-3334 02/12/01
QUALITY ASSURANCE PROVISIONS
9.1
9.2
9.3
9.4
9.5
Straddle mount type Power edge connector
Equipment Calibration
All test equipment and inspection facilities used in the performance of any test shall be maintained in a
calibration system in accordance with QS 9000
Inspection conditions
Unless otherwise specified, all inspections shall be performed under the following conditions:
a.
b.
c.
Acceptance
9.4.1
9.4.2
Qualification Testing
Qualification testing shall be performed on sample units predicted with equipment and procedures
normally used in production. Test sequence is as shown in Table 1.
Re-qualification Testing
If any of the following conditions occur, the responsible product engineer shall initiate re-qualification
testing consisting of the applicable parts of the test matrix, Table 1.
a.
b.
c.
Temperature: 25 +/- 5°C
Relative humidity: 30 to 60%
Barometric Pressure: Local ambient
Electrical and Mechanical requirements shall be as indicated in Paragraphs 6.0 and 7.0 using
test data and appropriate statistical techniques.
Failures attributed to equipment, test setup or operator error shall not disqualify the
product.
A significant design change is made to the existing product that impacts the product form, fit or
function. Examples of significant changes shall include, but not be limited to, changes in the
plating material composition or thickness, contact force or contact surface geometry, insulator
design, contact base material or contact lubrication requirements.
A significant event occurs during production or end use requiring corrective action to be taken
relative to the product design or manufacturing process.
A significant change is made to the manufacturing process that impacts the product form, fit or
function.
TYPE
PRODUCT SPECIFICATION
PDM: Rev:E
STATUS:
NUMBER
PAGE
AUTHORIZED BY
Ryan Yuan
CLASSIFICATION
6 of 11
Released
CONFIDENTIAL
GS-12-279
REVISION
DATE
Printed: May 26, 2010
07/04/06
E
GS-01-001
.