PIC16F88-E/P Microchip Technology, PIC16F88-E/P Datasheet - Page 482

• Manufacturer Part Number: PIC16F88-E/P
• Description: IC MCU FLASH 4KX14 EEPROM 18DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F88-E/P

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16F
• No. Of I/o's: 16
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 368Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ACICE0202 - ADAPTER MPLABICE 18P 300 MIL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
25.15
DS31025A-page 25-24
Design Tips
Question 1:
Answer 1:
Ensure that you have the control bits in the LCDSE properly configured, since these bits override
the TRIS bits.
Question 2:
Answer 2:
Your frame frequency may be too low. The frame frequency can be changed in the LCDPS
register.
Question 3:
Answer 3:
This may be due to misadjusted LCD voltage, some possibilities include:
1.
2.
If you are using the R-ladder, try different values of R, vary the R-ladder potentiometer.
The VLCDADJ pin should be connected to ground.
If you are using the charge pump, adjust the resistance value on the VLCDADJ pin.
I’m trying to use some of the LCD pins as inputs.
My LCD panel is flickering.
The LCD segments are not very visible.
1997 Microchip Technology Inc.