C8051F510-IM Silicon Laboratories Inc, C8051F510-IM Datasheet - Page 311

• Manufacturer Part Number: C8051F510-IM
• Description: IC 8051 MCU 32K FLASH 40-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F51xr

Specifications of C8051F510-IM

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 40-QFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), CAN, LIN, SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 33
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.25 V
• Data Converters: A/D 32x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: C8051F5x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4352 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 5.25 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F500DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 32 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1585 - PLATFORM PROG TOOLSTICK F588
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1562-5

Revision 1.1 to Revision 1.2












Updated “1. System Overview” with a voltage range specification for the internal oscillator.
Updated Table 5.6 on page 47 with new conditions for the internal oscillator accuracy. The internal
oscillator accuracy is dependent on the operating voltage range.
Updated “5. Electrical Characteristics” to remove the internal oscillator curve across temperature
diagram.
Updated SFR Definition 10.1 (REG0CN) with a new definition for Bit 6. The bit 6 reset value is 1b and
must be written to 1b.
Updated “21. Local Interconnect Network (LIN)” with a voltage range specification for the internal
oscillator.
Updated “22. Controller Area Network (CAN0)” with a voltage range specification for the internal
oscillator.
Updated SFR Definition 8.1 (REF0CN) with oscillator suspend requirement for ZTCEN.
Updated "16.3 Suspend Mode" with note regarding ZTCEN.
Updated Figure 6.4 with new timing diagram when using CNVSTR pin.
Added Port 2 Event and Port 3 Events to wake-up sources in Section 19.2.1.
Updated LIN Register Definitions 21.9 and 21.10 with correct reset values.
Updated C2 Register Definitions 28.2 and 28.3 with correct C2 and SFR addresses.
Rev. 1.2
C8051F50x/F51x
311