LMX9838SB/NOPB National Semiconductor, LMX9838SB/NOPB Datasheet - Page 14

• Manufacturer Part Number: LMX9838SB/NOPB
• Description: IC MODULE BLUETOOTH PORT 70LTCC
• Manufacturer: National Semiconductor

Specifications of LMX9838SB/NOPB

• Frequency: 2.4GHz
• Data Rate - Maximum: 704kbps
• Modulation Or Protocol: Bluetooth v2.0, Class 2
• Applications: PDA's, POS Terminals
• Power - Output: 0dBm
• Sensitivity: -80dBm
• Voltage - Supply: 2.5 V ~ 3.6 V
• Current - Receiving: 65mA
• Current - Transmitting: 65mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 70-LTCC
• Physical Interfaces: UART
• Data Rate: 704Kbps
• Operating Temperature Range: -40°C To +85°C
• Msl: MSL 4 - 72 Hours
• Frequency Max: 2480MHz
• Filter Terminals: SMD
• Frequency Min: 2402MHz
• No. Of Pins: 70
• Rohs Compliant: Yes
• For Use With: LMX9838DONGLE - KIT DESIGN DONGLE FOR LMX9838
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: LMX9838SB

www.national.com
V
I
f
V
DDACT
DD
PPOSC
13.6 TRANSMITTER CIRCUITRY
The transmitter consists of ROM tables, two Digital to Analog
(DA) converters, two low-pass filters, IQ mixers, and a power
amplifier (PA).
The ROM tables generate a digital IQ signal based on the
transmit data. The output of the ROM tables is inserted into
IQ-DA converters and filtered through two low-pass filters.
The two signal components are mixed up to 2.5 GHz by the
TX mixers and added together before being inserted into the
transmit PA.
13.6.1 IQ-DA Converters and TX Mixers
The ROM output signals drive an I- and a Q-DA converter.
Two Butterworth low-pass filters filter the DA output signals.
The 6 MHz clock for the DA converters and the logic circuitry
around the ROM tables are derived from the autotuner.
The TX mixers mix the balanced I- and Q-signals up to 2.4-2.5
GHz. The output signals of the I- and Q-mixers are summed.
13.7 32 kHz Oscillator
An oscillator is provided (see Figure 4) that is tuned to provide
optimum performance and low-power consumption while op-
Symbol
Supply Voltage
Supply Current (Active)
Nominal Output Frequency
Oscillating Amplitude
Duty Cycle
Parameter
TABLE 10. 32.768 kHz Oscillator Specifications
14
erating with a 32.768 kHz crystal. An external crystal clock
network is required between the 32k+ clock input (pad 27) and
the 32k- clock output (pad 28) signals.The oscillator is built in
a Pierce configuration and uses two external capacitors. Ta-
ble 10 provides the oscillator’s specifications.
In case the 32kHz is not used, it is recommended to leave
32k- open and connect 32k+ to GND.
Condition
FIGURE 4. 32.768 kHz Oscillator
1.62
40
Min
1.8
2
32.768
1.8
-
Typ
1.98
60
Max
30027903
V
µA
kHz
V
%
Unit