II-EVB-363ML-110 Connect One, II-EVB-363ML-110 Datasheet - Page 7

• Manufacturer Part Number: II-EVB-363ML-110
• Description: WiFi / 802.11 Modules & Development Tools Nano LANReach Evaluation Board
• Manufacturer: Connect One

Specifications of II-EVB-363ML-110

• Interface Type: RS-232, USB
• Security: 64/128 bit WEP, AES-CCM, TKIP, WPA, WPA2
• Operating Voltage: 9 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connect One
opening a socket. You may also try to PING the iChip from another station on the
network.
7.
The Nano modules support two additional connections:
SPI Slave
The Nano modules support an alternative Host interface to the RS232 Serial port and
the USB connection. A host equipped with an SPI Master connection may connect to
the Nano module’s SPI Slave port and interact with the module with AT+i commands.
An SPI cable (not supplied) connects to the II-EVB-363 J3 SIP connector:
A full description of interfacing the Nano modules with SPI is included below in
Appendix 5.
RJ45 10/100BaseT Ethernet LAN (for Nano WiReach)
The II-EVB-363 contains a standard 10/100BaseT RJ45 connector that allows a direct
connection to a wired LAN. The use for this connection is to implement a WiFi to
LAN bridge with the Nano WiReach module. The bridge feature is supported in Nano
WiReach firmware version 8.04 or later.
II-EVB-363NW User’s Manual
Additional Connections
nSPI_INT
nSPI MOSI
nSPI_CS
nSPI MISO
nSPI_CLK
GND
J3
7