2832632 Phoenix Contact, 2832632 Datasheet - Page 7

• Manufacturer Part Number: 2832632
• Description: ETHERNET SWITCH 8 PORT RJ45
• Manufacturer: Phoenix Contact
• Type: Ethernetr

Specifications of 2832632

• Features: 8 Ports
• Product: Switches
• Usoc Codes: RJ45
• Mounting Style: DIN Rail
• Number Of Ports: 8
• Gender: Female
• Shielding: Unshielded
• Contact Type: RJ45
• Number Of Rows: 2
• Operating Temperature Range: - 40 C to + 70 C
• Current, Consumption: 250 mA
• Phoenix Part Number: FL SWITCH LM 8TX
• Power Consumption: 6 W
• Voltage, Ripple: 3.6 Vpp
• Voltage, Supply: 24 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FL SWITCH LM 8TX

Local Status and Diagnostic Indicators
Assigning the IP address
Two mechanisms are available for the assignment of the IP address: BootP or via the RS232 interface. By default upon
delivery, the IP address is assigned via BootP. The Factory Manager configuration software has been optimized for use
with the LMS and enables easiest IP address assignment. The assignment mechanism can be modified via the web-based
management or via the RS232 interface.
Hardware Functions
–
All data telegrams that are received by the switch are saved and checked for validity. Invalid or faulty data packets (>1522
bytes or CRC errors) and fragments (<64 bytes) are rejected. Valid data telegrams are forwarded by the switch. The switch
always forwards the data using the data transmission rate that is used in the target network segment.
–
The switch automatically learns the addresses of the termination devices that are connected via a port by evaluating the
source address in the data telegrams. Only packets with unknown addresses, with a source address of this port or with a
multicast/broadcast address in the target address field are forwarded via the corresponding port. The switch can store up
to 8000 addresses in its address table with an aging time of approximately 300 seconds. This is important when more than
one termination device is connected to one or more ports. In this way, several independent subnetworks can be connected
to one switch.
–
Is one or both supply voltages missing, opens the alarm contact. On a restart, the switch executes a hardware selftest. In
the event of an error during the selftest, an SNMP trap is transmitted. During operation, an integrated watchdog monitors
the cyclic execution of the software program. If the watchdog is not cyclically triggered by the software, an SNMP trap is
transmitted.
7199_en_01
RJ45 ports
FX ports
Des.
US1
US2
LNK
LNK
100
"Store and forward“ Ethernet switching
Multi-address function
Diagnostics via alarm contact
Green or
Yellow
Green
Green
Green
yellow
Color
Status
Blink
Blink
Blink
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
Meaning
Supply voltage US1 in the tolerance zone
Supply voltage US1 less than 18 V DC
Supply voltage US2 in the tolerance zone
Supply voltage US2 less than 18 V DC
Link active
Link not active
Sending/receiving telegrams
Full duplex mode
Half duplex mode
Collision detect
Link active
Link not active
Sending/receiving telegrams
PHOENIX CONTACT
FL SWITCH LM ...
7