142-0303-011 Emerson Network Power, 142-0303-011 Datasheet - Page 3

• Manufacturer Part Number: 142-0303-011
• Description: CONN SMA JACK STR RG316 GOLD 3PC
• Manufacturer: Emerson Network Power
• Series: SMAr
• Type: Cable Jackr

Specifications of 142-0303-011

• Connector Style: SMA
• Connector Type: Jack, Female Sockets
• Contact Termination: Clamp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Cable Group: RG-316
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Straight
• Cable Type: RG 161/U, 174, 188, 316
• Features: Captivated contact
• Housing Material: Brass
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Angle: Straight
• Finish, Housing: Gold
• Material, Contact: Beryllium Copper
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Special Features: 3-Pc, Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 142-0303-11; 142-303-11; J990

INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
SMA SOLDER TYPE STRAIGHT JACKS,
STRAIGHT PLUGS, AND STRAIGHT
BULKHEAD JACKS FOR SEMI-RIGID CABLE
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
CABLE GROUP
(.086 semi-rigid)
(.141 semi-rigid)
RG 405/u
RG 402/u
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Place center contact on center conductor
4. Insert contact and cable into body assembly
center conductor.
making sure contact bottoms against cable
insulation. Solder center conductor to center
contact through solder hole. Solder must
not be allowed to run on outside of contact.
Use a minimum amount of solder for a good
joint. .020 (0.51) diameter solder is
recommended. Trim excess insulation.
making sure cable is bottomed against
insulator in body. Solder body to cable. Use
a minimum amount of heat to minimize cable
insulation movement.
Instructions
142-0593-001/006
142-0593-401/406
142-0693-001/006
142-0594-001/006
142-0594-401/406
142-0694-001/006
PART NUMBER
Assembly
.070 (1.78)
.085 (2.16)
“A”
3