142-0303-011 Emerson Network Power, 142-0303-011 Datasheet - Page 9

• Manufacturer Part Number: 142-0303-011
• Description: CONN SMA JACK STR RG316 GOLD 3PC
• Manufacturer: Emerson Network Power
• Series: SMAr
• Type: Cable Jackr

Specifications of 142-0303-011

• Connector Style: SMA
• Connector Type: Jack, Female Sockets
• Contact Termination: Clamp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Cable Group: RG-316
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Straight
• Cable Type: RG 161/U, 174, 188, 316
• Features: Captivated contact
• Housing Material: Brass
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Angle: Straight
• Finish, Housing: Gold
• Material, Contact: Beryllium Copper
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Special Features: 3-Pc, Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 142-0303-11; 142-303-11; J990

INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
SMA 3-PIECE PLUG, JACK AND BULKHEAD JACK
FOR RG 178 FLEXIBLE CABLE
Johnson Components
1. Identify piece parts. (4 piece parts plus nut and washer for bulkhead.)
2. Strip cable jacket and braid to dimensions shown. Do not nick braid during strip operations.
3. Slide crimp insert over braid and against jacket. Fold braid around crimp insert as shown. Strip dielectric to dimension shown. If
4. Assemble rear insulator over cable dielectric and contact over center conductor as shown.
5. Slide body assembly over contact, rear insulator and crimp insert. Crimp body using recommended crimp tool. Maintain forward
cable is being manually stripped the rear insulator can be assembled and used as a guide. Do not nick center conductor during strip
operation. Tin center conductor if contact is to be solder attached. Do not tin center conductor if contact is to be crimp attached.
Solder attachment: Solder contact to center conductor using 60/40 tin/lead solder. Care should be taken that excess solder is not
applied.
Crimp attachment: Crimp contact to center conductor using production tooling or hand tool 144-0000-910, setting #2 with positioner
141-0000-907. Crimp location should be centered between end of contact and x-hole. Crimp attachment to solid center conductor
cables is not recommended.
pressure on cable while crimping.
Body crimp die hex: .105 (2.67) hex
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
CABLE GROUP PART NUMBER CRIMP HEX
RG 178/u,
196
Instructions
142-0402-016
142-0302-016
142-0302-431
142-0302-436
142-0402-011
142-0302-011
Assembly
.105 (2.67)
.105 (2.67)
.105 (2.67)
.105 (2.67)
.105 (2.67)
.105 (2.67)
9