PIC32MX440F128L-80I/BG Microchip Technology, PIC32MX440F128L-80I/BG Datasheet - Page 34

• Manufacturer Part Number: PIC32MX440F128L-80I/BG
• Description: IC, 32BIT MCU, PIC32, 80MHZ, BGA-100
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX440F128L-80I/BG

• Controller Family/series: PIC32
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI, USB
• No. Of Pwm Channels: 5
• Core Size: 32 Bit
• Program Memory Size: 128 KB
• Core Processor: MIPS32® M4K™
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-TFBGA
• Embedded Interface Type: EUSART, I2C, SPI, USB
• Rohs Compliant: Yes
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EUART, I2C, SPI
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARD
• Number Of I /o: -
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

FIGURE 3-6:
DS61144D-page 30
3.3.5
Click Configure>Configuration Bits to confirm that the configuration settings are cor-
rect. Typical configuration settings for the starter kit are shown in Figure 3-6.
CONFIGURATION BIT SETTINGS
Setting the PIC32 Starter Kit configuration bits to cause the PIC32MX to oper-
ate faster than the maximum 80MHz system clock speed may cause the
PIC32MX to stop communicating with the PIC18F4550 Starter Kit debugger.
Should this occur, run the
default configuration. This utility is located on the PIC32 Starter Kit CD or in
the PIC32MX Starter Kit directory:
[install directory]\PIC32 Starter Kits\tools
Note:
Task 5, Confirm the Configuration Settings
The “Configuration Bits set in code” check box must be unchecked if the
config bits are set via this window and not in the code.
The configuration settings can also be embedded in the source file.
See the MPLAB C Compiler for PIC32 User’s Guide (DS51686) for
information.
sk_erase.exe
CAUTION
utility to re-flash the PIC32MX with a
© 2009 Microchip Technology Inc.