CS4207-DNZ Cirrus Logic Inc, CS4207-DNZ Datasheet - Page 2

• Manufacturer Part Number: CS4207-DNZ
• Description: IC Low Pwr,4/6 HD Aud Codec W/HP Amp
• Manufacturer: Cirrus Logic Inc
• Type: Audio Codecr

Specifications of CS4207-DNZ

• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 3
• Sigma Delta: Yes
• Dynamic Range, Adcs / Dacs (db) Typ: 105 / 110
• Voltage - Supply, Analog: 2.97 V ~ 5.25 V
• Voltage - Supply, Digital: 2.97 V ~ 5.25 V
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 48-QFN
• Package: 48WQFN
• Number Of Channels Per Chip: 16
• Adc/dac Resolution: 24 Bit
• Gain Control: Programmable
• Number Of Dacs: 3
• Number Of Dac Outputs: 2
• Operating Supply Voltage: 1.8|3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 598-1798

2
Digital Audio Interface Receiver




Digital Audio Interface Transmitters


System Features







Complete EIAJ CP1201, IEC-60958, S/PDIF
Compatible Receiver
32 kHz to 192 kHz Sample Rate Range
Automatic Detection of Compressed Audio
Streams
Integrated Sample Rate Converter
Two Independent EIAJ CP1201, IEC-60958,
S/PDIF Compatible Transmitters
32 kHz to 192 kHz Sample Rate Range
Very Low D3 Power Dissipation of <7 mW
Jack Detect Does not Require HDA Bus
BITCLK
All Configuration Settings are Preserved in D3
State
Pop/Click Suppression in State Transitions
Detects Wake Event and Generates Power
State Change Request when HDA Bus
Controller is in D3
Variable Power Supplies
Individual Power-down Managed
–
–
–
–
–
–
–
–
–
–
–
–
128 dB Dynamic Range
-120 dB THD+N
Supports Sample Rates up to 192 kHz
1:1 Input/Output Sample Rate Ratios
Jack Detect Active in D3
HDA Bus BITCLK not required for D3 State
1.5 V to 1.8 V Digital Core Voltage
3.3 V to 5.0 V Analog Core Voltage
3.3 V to 5.0 V Headphone Drivers
1.5 V to 3.3 V HD Bus Interface Logic
3.3 V Interface Logic levels for GPIO,
S/PDIF, and Digital Mic.
ADCs, DACs, PGAs, Headphone Driver,
S/PDIF Receiver, and Transmitters
General Description
The CS4207 is a highly integrated multi-channel low-
power HD Audio CODEC featuring 192 kHz DACs,
96 kHz ADCs, 192 kHz S/PDIF Transmitters and Re-
ceiver, Microphone pre-amp and bias voltage, and a
ground centered Headphone driver. Based on multi-bit,
delta-sigma modulation, it allows infinite sample rate
adjustment between 32 kHz and 192 kHz.
The ADC input path allows control of a number of fea-
tures. The microphone input path includes a selectable
programmable-gain pre-amplifier stage and a low-noise
MIC bias voltage supply. A PGA is available for line and
microphone inputs and provides analog gain with soft
ramp and zero cross transitions. The ADC also features
an additional digital volume attenuator with soft ramp
transitions.
The stereo headphone amplifier is powered from a sep-
arate internally generated positive supply, with an
integrated charge pump providing a negative supply.
This allows a ground-centered analog output with a
wide signal swing and eliminates external DC-blocking
capacitors.
The integrated digital audio interface receiver and trans-
mitters utilize a 24-bit, high-performance, monolithic
CMOS stereo asynchronous sample rate converter to
clock align the PCM samples to/from the S/PDIF inter-
faces. Auto detection of non-PCM encoded data
disables the sample rate conversion to preserve bit ac-
curacy of the data.
In addition to its many features, the CS4207 operates
from a low-voltage analog and digital core, making this
part ideal for portable systems that require low power
consumption in a minimal amount of space.
The CS4207 is available in a 48-pin WQFN package in
both Automotive (-40°C to +105°C) and Commercial (-
40°C to +85°C) grades. The CS4207 Customer Demon-
stration board is also available for device evaluation and
implementation suggestions. Please refer to
Information”
information.
on
p 142
for
complete
CS4207
“Ordering
DS880F1
ordering