MCP3901A0-E/SS Microchip Technology, MCP3901A0-E/SS Datasheet - Page 47

• Manufacturer Part Number: MCP3901A0-E/SS
• Description: IC ENERGY METER AFE 2CH 20-SSOP
• Manufacturer: Microchip Technology

Specifications of MCP3901A0-E/SS

• Number Of Bits: 24
• Number Of Channels: 2
• Power (watts): 10mW
• Voltage - Supply, Analog: 4.5 V ~ 5.5 V
• Voltage - Supply, Digital: 2.7 V ~ 5.5 V
• Package / Case: 20-SSOP (0.200", 5.30mm Width)
• Ic Function: Analog Front End Device IC
• Supply Voltage Range: 4.5V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: SSOP
• No. Of Pins: 20
• No. Of Channels: 2
• Input Voltage: 2.2 V to 2.6 V
• Mounting Style: SMD/SMT
• Supply Voltage Max: 5.5V
• Rohs Compliant: Yes
• Interface Type: SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 7-5:
© 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5
bit 4
bit 3-2
bit 1-0
READ<1> READ<0>
R/W-1
READ<1:0>: Address Loop Setting bits
11 = Address counter loops on entire register map
10 = Address counter loops on register types (default)
01 = Address counter loops on register groups
00 = Address not incremented, continually read same single register
DR_LTY: Data Ready Latency Control bit
1 = “No Latency” Conversion, DR pulses after 3 DRCLK periods (default)
0 = Unsettled Data is available after every DRCLK period
DR_HIZN: Data Ready Pin Inactive State Control bit
1 = The data ready pin default state is a logic high when data is NOT ready
0 = The data ready pin default state is high-impedance when data is NOT ready (default)
DRMODE<1:0>: Data Ready Pin (DR) Control bits
11 = Both Data Ready pulses from ADC0 and ADC Channel 1 are output on the DR pin.
10 = Data Ready pulses from ADC Channel 1 are output on the DR pin. DR from ADC Channel 0 are not
01 = Data Ready pulses from ADC Channel 0 are output on the DR pin. DR from ADC Channel 1 are not
00 = Data Ready pulses from the lagging ADC between the two are output on the DR pin. The lagging
DRSTATUS_CH<1:0>: Data Ready Status bits
11 = ADC Channel 1 and Channel 0 data is not ready (default)
10 = ADC Channel 1 data is not ready, ADC Channel 0 data is ready
01 = ADC Channel 0 data is not ready, ADC Channel 1 data is ready
00 = ADC Channel 1 and Channel 0 data is ready
R/W-0
present on the pin.
present on the pin.
ADC selection depends on the PHASE register and on the OSR (default).
STATUS AND COMMUNICATION REGISTER: ADDRESS 0x09
W = Writable bit
‘1’ = Bit is set
DR_LTY
R/W-1
DR_HIZN
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
DRMODE<1> DRMODE<0> DRSTATUS_CH1 DRSTATUS_CH0
R/W-0
R/W-0
x = Bit is unknown
R-1
MCP3901
DS22192C-page 47
R-1
bit 0