PIC18F25K80-E/MM Microchip Technology, PIC18F25K80-E/MM Datasheet - Page 409

• Manufacturer Part Number: PIC18F25K80-E/MM
• Description: ECAN, 32KB Flash, 4KB RAM, 16 MIPS, 12-bit ADC, CTMU 28 QFN-S 6x6mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25K80-E/MM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: *
• Processor Series: PIC18F25K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3648 B
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EXAMPLE 27-4:
 2011 Microchip Technology Inc.
; Need to transmit Standard Identifier message 123h using TXB0 buffer.
; To successfully transmit, CAN module must be either in Normal or Loopback mode.
; TXB0 buffer is not in access bank. Use WIN bits to map it to RXB0 area.
MOVF
ANDLW
IORLW
MOVWF
; Now TXB0 is mapped in place of RXB0. All future access to RXB0 registers will actually
; yield TXB0 register values.
; Load transmit data into TXB0 buffer.
MOVLW
MOVWF
; Load rest of the data bytes - up to 8 bytes into “TXB0” buffer using RXB0 registers.
...
; Load message identifier
MOVLW
MOVWF
MOVLW
MOVWF
; No need to load RXB0EIDL:RXB0EIDH, as we are transmitting Standard Identifier Message only.
; Now that all data bytes are loaded, mark it for transmission.
MOVLW
MOVWF
; If required, wait for message to get transmitted
BTFSC
BRA
; Message is transmitted.
; If required, reset the WIN bits to default state.
CANCON, W
B’11110000’
B’00001000’
CANCON
MY_DATA_BYTE1
RXB0D0
60H
RXB0SIDL
24H
RXB0SIDH
B’00001000’
RXB0CON
RXB0CON, TXREQ
$-2
TRANSMITTING A CAN MESSAGE USING WIN BITS
Preliminary
; WIN bits are in lower 4 bits only. Read CANCON
; register to preserve all other bits. If operation
; mode is already known, there is no need to preserve
; other bits.
; Clear WIN bits.
; Select Transmit Buffer 0
; Apply the changes.
; Load first data byte into buffer
; Access TXB0D0 via RXB0D0 address.
; Load SID2:SID0, EXIDE = 0
; Load SID10:SID3
; Normal priority; Request transmission
; Is it transmitted?
; No. Continue to wait...
PIC18F66K80 FAMILY
DS39977C-page 409