SLFLD25-1GM1UI STEC, SLFLD25-1GM1UI Datasheet - Page 19

• Manufacturer Part Number: SLFLD25-1GM1UI
• Manufacturer: STEC
• Type: Flash Disk Moduler

Specifications of SLFLD25-1GM1UI

• Density: 1GByte
• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Mounting: Screw
• Pin Count: 44
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 3.18/4.75V
• Operating Supply Voltage (max): 3.465/5.25V
• Programmable: Yes
• Lead Free Status / Rohs Status: Compliant

SLFLD25-xxx(M/G)M1U(I)
Datasheet
Write Long Sector
Write Multiple
Write Multiple w/o Erase
Write Sector(s)
Write Sector(s) w/o Erase
Write Verify
Command Set
38h
32h or 33h
C5h
CDh
30h (w/ retry)
31h (w/o retry)
3Ch
Code
61000-04502-109, August 2007
This command is provided for compatibility purposes and is similar
to the Write Sector(s) command except that it writes 516 bytes
instead of 512 bytes.
This command is similar to the Write Sectors command. Interrupts
are not presented on each sector, but on the transfer of a block
which contains the number of sectors defined by Set Multiple
command.
This command is similar to the Write Multiple command, except
that an implied erase before the write operation is not performed.
Note: Before using this command, it is required to erase the
respective sectors using the Erase Sectors command
This command writes from 1 to 256 sectors as specified in the
Sector Count register. A sector count of zero requests 256
sectors. The transfer begins at the sector specified in the Sector
Number register.
This command is similar to the Write Sector(s) command, except
that an implied erase before the write operation is not performed.
Note: Before using this command, it is required to erase the
respective sectors using the Erase Sectors command.
This command is similar to the Write Sector(s) command except
each sector is verified immediately after being written.
Description
IDE Flash Drive
19