SLCF064JF STEC, SLCF064JF Datasheet - Page 46

• Manufacturer Part Number: SLCF064JF
• Manufacturer: STEC
• Type: CompactFlashr

Specifications of SLCF064JF

• Density: 64MByte
• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: Not Required
• Mounting: Socket
• Pin Count: 50
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 3.18/4.75V
• Operating Supply Voltage (max): 3.465/5.25V
• Programmable: Yes
• Lead Free Status / Rohs Status: Not Compliant

SLCF064J(I)
REVISION HISTORY
Rev. Change Description from Previous Revision
-301 5/26/04. Initial Release.
-302 7/1/04. Features bullets on page 1 updated. Pin
-303 7/9/04. Endurance increased from 300,000 cycles min
-304 7/22/04. “up to” added to sustained read and write
SimpleTech Inc. reserves the right to make changes to specifications and product descriptions such as but not limited to numbers,
parameters and other technical information contained herein without notice. Contact SimpleTech Inc. sales office to obtain the latest
specifications. SimpleTech Inc. grants no warranty with respect to this Data Sheet, neither explicit nor implied, and it is not liable for
direct or indirect damages. Some States do not grant the exclusion of incidental damages and as such this statement may not be valid in
such states. The provisions of this Data Sheet do not convey to the purchaser of the device any license under any patent rights or other
intellectual property rights of SimpleTech Inc. or others.
Assignments for IDE Mode corrected to indicate
which pins are not used in IDE Mode. Pinout of the
PC Card to CF Adapter corrected to call out DASP
and -PDIAG. Pin Description changes: -CD1 and
-CD2 not used in IDE mode; -IOIS16 not used in IDE
mode; -WAIT description corrected to not used by card
and pulled up by 4.7K ohm resistor. Performance
rates for read and write described as sustained read
and sustained write. AC Characteristics VCC 3.3V
operating tolerances restated as +5% and -3.6%
tolerances. Error register bit 0 Function “not
supported” phrase removed. DMA commands
removed (paper only error indicated that DMA was
supported). Identify Drive Information table updated to
reflect DMA not supported. “-F” p/n suffix selection
added to notes of the Ordering Information. ATA-4
compatiblility added to Features. DC Characterists
Sleep Mode values changed from 80uA to 800uA for
3.3V power supply, and 120uA to 1200uA for 5V
power supply.
to 2 million cycles min.
data rate performance.
Document Part Number 61000-02805-304 July 2004
COMPACTFLASH
Page 46