20-101-1138 Rabbit Semiconductor, 20-101-1138 Datasheet - Page 40

• Manufacturer Part Number: 20-101-1138
• Description: RCM4300 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1138

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Data Bus Width: 8 bit
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet
• Flash: 2 MBytes
• Timers: 10 x 8 bit
• Operating Supply Voltage: 3.3 V
• Board Size: 72 mm x 47 mm x 21 mm
• For Use With/related Products: RCM4300
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1141

A program “runs” in either mode, but can only be downloaded and debugged when the
RCM4300 is in the Program Mode.
Refer to the
gramming port.
4.3.2 Standalone Operation of the RCM4300
Once the RCM4300 has been programmed successfully, remove the programming cable
from the programming connector and reset the RCM4300. The RCM4300 may be reset by
cycling, the power off/on or by pressing the
RCM4300 module may now be removed from the Prototyping Board for end-use
installation.
RabbitCore RCM4300 User’s Manual
CAUTION: Power to the Prototyping Board or other boards should be disconnected
NOTE:
when removing or installing your RCM4300 module to protect against inadvertent
shorts across the pins or damage to the RCM4300 if the pins are not plugged in cor-
rectly. Do not reapply power until you have verified that the RCM4300 module is
plugged in correctly.
while debugging, remember to recompile the working application using the
Code and BIOS in Flash, Run in RAM
RCM4300 in a standalone installation.
Rabbit 4000 Microprocessor User’s Manual
If you used the
Code and BIOS in RAM
RESET
option once you are ready to use the
button on the Prototyping Board. The
for more information on the pro-
BIOS memory compiler option
40