TLE7263E Infineon Technologies, TLE7263E Datasheet - Page 14

• Manufacturer Part Number: TLE7263E
• Description: IC SYSTEM BASIS CHIP DSO-36
• Manufacturer: Infineon Technologies

Specifications of TLE7263E

• Controller Type: System Basis Chip
• Interface: SPI
• Voltage - Supply: 13.5V
• Current - Supply: 1mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: DSO-36
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SP000075929; TLE7263E; TLE7263EINTR

4.5
The SBC Stop Mode has the advantage of reducing the current consumption to a
minimum, while supplying the microcontroller with its quiescent current during its power
saving mode (“Stop”). This mode is entered via SPI command, and turns-off the
integrated bus transceivers and respective termination, but the main voltage regulator
remains active.
A voltage level change at the monitoring / wake-up pins will, in contrast to the behavior
in Sleep Mode, generate a pulse at the WKO pin that is monitored by the microcontroller,
e.g. at an external interrupt input. In case the wake-up event was a CAN or LIN message,
the respective RxD pin will be pulled low. (The microcontroller itself has to take care of
switching SBC modes after a wake-up event notification (see
Figure 7
Data Sheet
MS2
0
SBC Stop Mode without Cyclic Sense
SBC Active Mode
State Diagram “SBC Stop Mode without Cyclic Sense”
MS1
0 / 1
MS0
0 / 1
µController SPI-Command:
- disable „cyclic sense function“ via SPI Timing Bits
- select SBC Stop Mode via SPI Mode Bits
- window watchdog activation / deactivation via SPI
[„off“ once current consumption below threshold]
Vcc1
ON
MS2
1
SBC Stop Mode
HS-Switch = OFF
MONx inputs
Initialization of
MS1
1
MS0
1
1)
Vcc1
ON
14
SBC Standby Mode
Vcc1
ON
wake event notification [to µC]:
- CAN msg. => RxD
- LIN msg. => RxD
- MONx => WKO
transition caused by:
- event at MONx inputs
- CAN message
- LIN message
[SPI indicates source]
Figure
switched into SBC Standby mode
1)
if initialization fails, device is
Rev. 1.51, 2007-06-22
LIN
CAN
7).)
Power Up
stop_TLE7263
Start Up
(low)
(low)
TLE 7263E
Features