C2254PW 3M, C2254PW Datasheet - Page 43

• Manufacturer Part Number: C2254PW
• Description: LCD Touch Panels 22 C2254PW 10 Point Multi-Touch
• Manufacturer: 3M
• Series: -r
• Type: Capacitiver

Specifications of C2254PW

• Length: 18.6" (473.8mm)
• Width: 19.7" (500mm)
• Height: 11.6" (296.1mm)
• Interface: USB/Serial
• Diagonal Screen Size: 22" (559mm)
• Lead Free Status / Rohs Status: Details

3M™ Multi-Touch Chassis Display User Guide
Soft Reset
Syntax:
Response:
Description:
Unit Type
<SOH>R<CR>
<SOH>0<CR> Positive response
Initializes the hardware and the firmware, causes the controller to stop sending data, and
recalculates the environmental conditions (for example, stray and offset values). The
Reset command also cancels the Calibrate command and returns the controller to normal
operation.
<SOH>UT<CR>
Responds with an 8-character identity string. This string identifies the type of controller
currently attached to the system, lists the features supported by the controller, and outputs
the status of the controller hardware (a self-test code).
Returns an identification code up to 8 ASCII characters in the following format:
<SOH>TtFfffSs<CR>
where:
Tt
Ffff
Ss
The PX running with no errors returns the following string:
<SOH> AD****00 <CR>
The format includes two bitmapped ASCII hex status bytes. A “00” indicates no errors.
= Two ASCII characters that identify the controller type.
= Four ASCII characters that indicate the features supported by the
= Two ASCII characters that provide status information about the
AD
controller.
**** Indicates no additional features configured
controller hardware. The two characters represent one byte. Each
character is in the range 0 to 9 and A to F.
Table 2 defines the meaning of each bit in the status byte. Each bit
can be set to 1 or 0, where 1 = an error and 0 = no error. So a
response of:
00 = No diagnostic errors (normal response)
3M Touch Systems, Inc. Proprietary Information -- 37732v04
Indicates the PX series of controllers
.
43