MCP23S18-E/SP Microchip Technology, MCP23S18-E/SP Datasheet - Page 20

• Manufacturer Part Number: MCP23S18-E/SP
• Description: IC EXPANDER SPI 16BIT I/O 28SDIP
• Manufacturer: Microchip Technology

Specifications of MCP23S18-E/SP

• Package / Case: 28-DIP (0.300", 7.62mm)
• Interface: SPI
• Number Of I /o: 16
• Interrupt Output: Yes
• Frequency - Clock: 10MHz
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Through Hole
• Logic Family: MCP
• Operating Supply Voltage: 1.8 V to 5.5 V
• Power Dissipation: 700 mW
• Operating Temperature Range: - 40 C to + 125 C
• Input Voltage: 1.8 V to 5.5 V
• Maximum Clock Frequency: 10 MHz
• Mounting Style: Through Hole
• Output Current: 400 mA
• Output Voltage: 0.7 V
• Chip Configuration: 16 Bit
• Bus Frequency: 10MHz
• Ic Interface Type: SPI
• No. Of I/o's: 16
• Supply Voltage Range: 1.8V To 5.5V
• Digital Ic Case Style: DIP
• No. Of Pins: 28
• Filter Terminals: DIP
• Rohs Compliant: Yes
• Delay Time: 50ns
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP23018/MCP23S18
1.6.3
The GPINTEN register controls the interrupt-on-
change feature for each pin.
If a bit is set, the corresponding pin is enabled for
interrupt-on-change. The DEFVAL and INTCON
registers must also be configured if any pins are
enabled for interrupt-on-change.
REGISTER 1-5:
DS22103A-page 20
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
GPINT7
R/W-0
INTERRUPT-ON-CHANGE
CONTROL REGISTER
GPINT7:GPINT0: General purpose I/O interrupt-on-change pins <7:0>
1 = Enable GPIO input pin for interrupt-on-change event
0 = Disable GPIO input pin for interrupt-on-change event.
GPINT6
R/W-0
GPINTEN – INTERRUPT-ON-CHANGE PINS
W = Writable bit
‘1’ = Bit is set
GPINT5
R/W-0
GPINT4
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
GPINT3
R/W-0
GPINT2
R/W-0
© 2008 Microchip Technology Inc.
x = Bit is unknown
GPINT1
R/W-0
GPINT0
R/W-0
bit 0