7-215083-6 TE Connectivity, 7-215083-6 Datasheet - Page 3

• Manufacturer Part Number: 7-215083-6
• Description: CON MICROMATCH 6 WAY RIBBION MALE
• Manufacturer: TE Connectivity
• Series: Micro-Match Seriesr

Specifications of 7-215083-6

• Product Type: Plugs - Housings
• Contact Gender: Pin (Male)
• Pitch: 1.27 mm
• Number Of Positions / Contacts: 6
• Number Of Rows: 2
• Row Spacing: 1.5 mm
• Mounting Style: Free Hanging
• Mounting Angle: Right
• Latching Type: Unlatched
• Termination Style: Cable
• Wire Type: Ribbon
• Housing Material: Thermoplastic Polyester, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Tin over Nickel
• Voltage Rating: 230 V
• Current Rating: 1.5 A
• Type Of Connector: Male-On-Wire
• Wire/cable Type: Ribbon Cable
• Insulation Diameter (mm [in]): 0.90 [.035]
• Polarization: Without
• Number Of Positions: 6
• Wire Range (mm [awg]): 0.08-0.09² [28]
• Centerline (mm [in]): 1.27 [0.050]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Color: Red
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable
• Packaging Method: Box
• Packaging Quantity: 250
• Lead Free Status / Rohs Status: Details

.
3.3.3
Male-on-board connector assembly, consisting of a number of contact pins, press-fit in a moulded
housing.
3.3.4
Male-on-wire connector assembly, consisting of a number of contact with slotted beam section, press-fit in
a moulded housing, The connector features a cable cover, pre-loaded on the housing.
3.3.5
Paddle board connector assembly, consisting of a number of contact with slotted beam section, press-fit
in a moulded housing. The connector features a cable cover, pre-loaded on the housing.
After the application of the cable, the connector assembly is soldered in the PC board thus providing a
reliable and cost-effective permanenet connection of ribbon cable to the PC-board.
3.3.6
Top entry, consisting of a number of contact springs press-fit in moulded housings.
3.3.7
Bottom entry, consisting of a number of contac springs, press-fit in moulded housings. The housing is
partly falling in the PCB, causing a low built-in height.
3.3.8
The cosi connector is a male-on-wire connector designed for discrete wires.
Contacts can be terminated to the wire with a semi-automatic stripper crimper or with a dedicated
handtool, and manually inserted into the housing.
3.4
With the connector versions, mentioned in section 3, the following interconnections can be realised
•
•
•
•
•
•
•
Rev. F
R6-77 (Rev. 07-01)
Wire-to-board connection with the cable parallel to the PC board.
Wire-to-board connection with the cable perpendicular to the PC board .
Board-to-board connection with two parallel boards (sandwich configuration)
Board-to-board connection with the perpendicular PC boards (mother/daughter board
configuration)
Wire-to-board and/or Board-to-board connections with the connector system positioned on the
solder side of the PC board -for instance Surface Mount Application-
Permanent connections of ribbon cable to PC board, using the Paddle board connector version.
Wire-to board connection with discrete wires.
Male-on-board connector
Male-on-wire connector
Paddle board connector
Female-on-board SMD connector.
Female-in board SMD connector.
Male on wire COSI (Crimp On Snap In) connector
Application
108-19052
Page 3 of 15