7-215083-6 TE Connectivity, 7-215083-6 Datasheet - Page 7

• Manufacturer Part Number: 7-215083-6
• Description: CON MICROMATCH 6 WAY RIBBION MALE
• Manufacturer: TE Connectivity
• Series: Micro-Match Seriesr

Specifications of 7-215083-6

• Product Type: Plugs - Housings
• Contact Gender: Pin (Male)
• Pitch: 1.27 mm
• Number Of Positions / Contacts: 6
• Number Of Rows: 2
• Row Spacing: 1.5 mm
• Mounting Style: Free Hanging
• Mounting Angle: Right
• Latching Type: Unlatched
• Termination Style: Cable
• Wire Type: Ribbon
• Housing Material: Thermoplastic Polyester, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Tin over Nickel
• Voltage Rating: 230 V
• Current Rating: 1.5 A
• Type Of Connector: Male-On-Wire
• Wire/cable Type: Ribbon Cable
• Insulation Diameter (mm [in]): 0.90 [.035]
• Polarization: Without
• Number Of Positions: 6
• Wire Range (mm [awg]): 0.08-0.09² [28]
• Centerline (mm [in]): 1.27 [0.050]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Color: Red
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable
• Packaging Method: Box
• Packaging Quantity: 250
• Lead Free Status / Rohs Status: Details

.
Rev. F
R6-77 (Rev. 07-01)
3.6.10.
3.6.11.
3.6.12
3.6.13
3.6.9.
Termination resistance
SMC types
Termination resistance
SMD types
Termination resistance paddle
board.
Contact retention in housing.
Mechanical operation
Test description
E L E C T R I C A L (continued)
Max. open voltage 20 mV
Max. current 100 mA
Termination resistance consists of
IDC slot resistance + contact
resistance +bulk connectors +
resistance contact member
Pcboard + PCB path.
Requirement: 10 mΩ max.
(exclude bulk resistance)
Max. open voltage 20 mV
Max. current 100 mA
Termination resistance consists of
bulk resistance of contact + solder
connection.
Requirement: 10 mΩ max.
Max. open voltage 20 mV
Max. current 100 mA
Termination resistance consists of
IDC slot resistance + contact bulk
resistance
Requirement: 10 mΩ max.
Requirements:
contact.No dislodge from housing.
Contact retention in housing
male on wire conector
Number of operations: 20
Frequency: 10 times/min.
Minimum time between 2
operations: 1 sec.
Performance Requirements
MECHANICAL
or Severity
10 N min. per
In acc. With IEC 512-2 test 2a
Under dry circuit conditions
All contacts measured.
In acc. With IEC 912 test 2a
Under dry circuit conditions
All contacts measured.
In acc. With IEC 512-2 test 2a
Under dry circuit conditions
All contacts measured.
In acc. with IEC 512-8 test 5b.
(COSI: 512-8 test15a)
Contact retention in housing
female connector
In acc. with IEC 512-5
test 9a.
Procedures
108-19052
Page 7 of 15