ADG407BPZ Analog Devices Inc, ADG407BPZ Datasheet - Page 18

• Manufacturer Part Number: ADG407BPZ
• Description: IC MULTIPLEXER DUAL 8X1 28PLCC
• Manufacturer: Analog Devices Inc
• Series: LC²MOSr
• Type: Analog Multiplexerr

Specifications of ADG407BPZ

• Function: Multiplexer
• Circuit: 2 x 8:1
• On-state Resistance: 80 Ohm
• Voltage Supply Source: Single Supply
• Voltage - Supply, Single/dual (±): 5V, 12V
• Current - Supply: 100µA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 28-LCC (J-Lead)
• No. Of Circuits: 2
• Supply Current: 100µA
• On State Resistance Max: 50ohm
• Supply Voltage Range: 10.8V To 13.2V, ± 13.5V To ± 16.5V
• Operating Temperature Range: -40°C To +85°C
• Multiplexer Configuration: Dual 8:1
• Number Of Inputs: 16
• Number Of Outputs: 2
• Number Of Channels: 2
• Analog Switch On Resistance: 125@10.8VOhm
• Analog Switch Turn On Time: 240ns
• Analog Switch Turn Off Time: 180ns
• Package Type: PLCC
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (typ): 12V
• Single Supply Voltage (max): 25V
• Dual Supply Voltage (typ): ±15V
• Dual Supply Voltage (max): ±22V
• Mounting: Surface Mount
• Pin Count: 28
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Package: 28PLCC
• Maximum On Resistance: 125@10.8V Ohm
• Maximum Propagation Delay Bus To Bus: 150@±15V|220@12V ns
• Maximum High Level Output Current: 20 mA
• Multiplexer Architecture: 8:1
• Maximum Turn-off Time: 180@12V ns
• Maximum Turn-on Time: 240@12V ns
• Power Supply Type: Single|Dual
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADG406/ADG407/ADG426
TERMINOLOGY
V
Most positive power supply potential.
V
Most negative power supply potential in dual supplies. In single
supply applications, it may be connected to ground.
GND
Ground (0 V) reference.
R
Ohmic resistance between the D and S terminals.
R
Difference between the R
I
Source leakage current when the switch is off.
I
Drain leakage current when the switch is off.
I
Channel leakage current when the switch is on.
V
Analog voltage on Terminal D, Terminal S.
C
Channel input capacitance for off condition.
C
Channel output capacitance for off condition.
C
On switch capacitance.
C
Digital input capacitance.
t
Delay time between the 50% and 90% points of the digital input
and switch on condition.
S
D
D
ON
ON
ON
S
D
D
IN
DD
SS
D
, I
(Off)
(Off)
, C
(Off)
(V
(Off)
(EN)
S
Match
(On)
S
S
)
(ON)
ON
of any two channels.
Rev. B | Page 18 of 20
t
Delay time between the 50% and 90% points of the digital input
and switch off condition.
t
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from
one address state to another.
t
Off time measured between 80% points of both switches when
switching from one address state to another.
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
Crosstalk
A measure of unwanted signal which is coupled through from
one channel to another as a result of parasitic capacitance.
Off Isolation
A measure of unwanted signal coupling through an off channel.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
I
Positive supply current.
I
Negative supply current.
OFF
TRANSITION
OPEN
INL
DD
SS
INL
INH
(I
(EN)
INH
)