ttsv02622 ETC-unknow, ttsv02622 Datasheet - Page 38

• Manufacturer Part Number: ttsv02622
• Description: Sts-24 Backplane Transceiver
• Manufacturer: ETC-unknow

TTSV02622 STS-24 Backplane Transceiver
Register Descriptions
Table 7. Register Description (continued)
38
Address
(hex)
0A
0B
09
[7:4]
[4:0]
[7:5]
[4:0]
[7:5]
Bit
0
1
2
3
THRESHOLD VALUE
THRESHOLD VALUE
SELECT FOR CH 1
SELECT FOR CH 1
PARALLEL PORT
FIFO ALIGNER
FIFO ALIGNER
SERIAL PORT
OUTPUT MUX
OUTPUT MUX
Name
(max)
(min)
(continued)
Device Register Blocks (continued)
CREG 0 = TOH output 1 is multiplexed to CH 2.
CREG 0 = Parallel output data bus 1 is multiplexed to CH 2.
CREG This is the minimum threshold value for the per-channel
CREG This is the maximum threshold value for the per-channel
Type
1 = TOH output 1 is multiplexed to CH 1.
1 = Parallel output data bus 1 is multiplexed to CH 1.
receive direction alignment FIFOS. If and when the mini-
mum threshold value is violated by a particular channel,
then the interrupt event FIFO ALIGNER THRESHOLD
ERROR will be generated for that channel and latched as
a FIFO ALIGNER THRESHOLD ERROR FLAG in the
respective per STS-12 interrupt alarm register.
The allowable range for minimum threshold values is 1
to 23.
Note: The minimum FIFO aligner threshold values apply
receive direction alignment FIFOS. If and when the maxi-
mum threshold value is violated by a particular channel,
then the interrupt event FIFO ALIGNER THRESHOLD
ERROR will be generated for that channel and latched as
a FIFO ALIGNER THRESHOLD ERROR FLAG in the
respective per STS-12 interrupt alarm register.
The allowable range for maximum threshold values is 0
to 22.
Note: The minimum FIFO aligner threshold values apply
to both channels.
to both channels.
Reserved.
Reserved.
Reserved.
Reserved.
Reserved.
Description
Agere Systems Inc.
June 2003
Reset
Value
(hex)
0F
0F
02
15