zic2410 California Eastern Laboratories, zic2410 Datasheet - Page 25

• Manufacturer Part Number: zic2410
• Description: Single-chip Solution, Compliant With Zigbee
• Manufacturer: California Eastern Laboratories

When ZIC2410 goes into Power-Down mode by setting PDSTART field of PDM register, PD bit
of PCON register should also be set. To go into PD (Power-Down) mode, PDMODE field
should be set as 1, 2, or 3. After that, PD bit of PCON register should be set to 1 by the
following instruction that set PDMODE. For more detailed information, please refer to the
Figure 11.
PCON (POWER CONTROL REGISTER, 0x87)
Bit
7:2
1
0
Rev A
Name
IDLE
PD
Reserved
Power-down Mode.
When this field is set to ‘1’, all the clocks in MCU are stopped.
Idle Mode.
When this field is set to ‘1’, all the clocks in MCU except peripherals
are stopped. Only peripherals operate normally.
Figure 11 – Power-Down mode setting procedure
Table 10 – Power Control Registers
Document No. 0005-05-07-00-000
ZIC2410 Datasheet
Descriptions
R/W
R/W
R/W
Page 25 of 119
Reset
Value
0
0
0