ADL5391-EVALZ AD [Analog Devices], ADL5391-EVALZ Datasheet - Page 14

• Manufacturer Part Number: ADL5391-EVALZ
• Description: DC to 2.0 GHz Multiplier
• Manufacturer: AD [Analog Devices]

ADL5391
Table 4. Evaluation Board Configuration Options
Component
J1, J5, J6, J8
J2, J4, J7, J9
J3
T1, T2, T3, T4
C2, C4, C7, C8, C14,
C17, C18, C20
C1, C5, C6, C9, C13,
C15, C16, C19
R9, R10, R14, R15, R18
R19, R20
R7, R13, R16, R17
C10
C12
C3
C11
R1
R2, R3, R12
R5, R6
R4
R8, R11
SW1
TP1, TP2, TP4, TP5,
TP6, TP7, TP8, TP9
TP13
TP12, TP14
TP3, TP10, TP11
DUT
Function
Snubbing resistors.
Snubbing resistors.
Snubbing resistors.
Filter capacitor.
Filter capacitor.
Filter capacitor.
Matching resistor.
Matching resistor.s
Matching resistor.
Can be used for voltage divider or filtering.
Enable switch: enable = 5 V, disable = 0 V.
Red test loop.
Black test loops.
Yellow test loops.
SMA connectors for single-ended, high frequency operation. If J5
and J6 are used, R9, R10, R14, and R15 should be removed. R2 and
R3 should also be populated to match the inputs. If used in broadband
operation, C4, C7, C8, and C2 need to be replaced with 0 Ω resistors.
SMA connectors for broadband differential operation. If these are
used, baluns should be removed and jumped over using 0 Ω
resistors, and C14, C15, C18, and C20 should be removed.
SMA connector for connection to GADJ.
Single-ended-to-differential transformation for high frequency ac
operation. If dc operation is necessary, the baluns can be removed
and jumped over using 0 Ω resistors.
DC block capacitors.
Not installed, dc block capacitors.
Filter capacitor.
Matching resistors. Input impedance to X, Y, and Z inputs are the
same. For the same frequency, R1, R2, and R3 should be the same.
Green test loop.
ADL5391.
Rev. 0 | Page 14 of 16
Part Number
TC1-1-13M+
Mini-Circuits
ADL5391ACPZ
Default Value
WP, ZP, YP, XP
WM, ZM, YM, XM
GADJ
T3 and T4 are populated,
but the Y and Z inputs
are set up for dc operation.
0.1 μF, 0402 capacitors
Open, 0402 capacitors
0 Ω, 0402 resistors
0 Ω, 0603 resistors
Open, 0402 resistors
100 pF, 0402 capacitor
0.1 μF, 0402 capacitor
0.1 μF, 0603 capacitor
4.7 μF, 3216 capacitor
56.2 Ω, 0603 resistor
Open, 0603 resistors
24.9 Ω, 0402 resistors
100 Ω, 0603 resistor
Open, 0603 resistors
SW1 installed
WP_DC, WM_DC,
ZM_DC, ZP_DC, YP_DC,
YM_DC, XP_DC, XM_DC
V
COMM
GADJ_DC, ENBL_DC, VMID
POS