T89C51CC01 Atmel, T89C51CC01 Datasheet - Page 136

• Manufacturer Part Number: T89C51CC01
• Description: Enhanced 8-Bit Microcontroller
• Manufacturer: Atmel

Figure 61. A/D Converter clock
ADC Standby Mode
IT ADC Management
Routines examples
136
T89C51CC01
CPU Core Clock Symbol
CLOCK
CPU
When the ADC is not used, it is possible to set it in standby mode by clearing bit ADEN
in ADCON register. In this mode its power dissipation is reduced.
An interrupt end-of-conversion will occurs when the bit ADEOC is activated and the bit
EADC is set. For re-arming the interrupt the bit ADEOC must be cleared by software.
Figure 62. ADC Interrupt Structure
1. Configure P1.2 and P1.3 in ADC channels
2. Start a standard conversion
3. Start a precision conversion (need interrupt ADC)
// configure channel P1.2 and P1.3 for ADC
// Enable the ADC
// The variable "channel" contains the channel to convert
// The variable "value_converted" is an unsigned int
// Clear the field SCH[2:0]
// Select channel
// Start conversion in standard mode
// Wait flag End of conversion
// Clear the End of conversion flag
// read the value
// The variable "channel" contains the channel to convert
// Enable ADC
ADCF = 0Ch
ADCON = 20h
ADCON and = F8h
ADCON | = channel
ADCON | = 08h
while((ADCON and 01h)! = 01h)
ADCON and = EFh
value_converted = (ADDH << 2)+(ADDL)
EADC = 1
÷
2
ADEOC
ADCON.2
Prescaler ADCLK
EADC
IEN1.1
ADC Clock
Converter
ADCI
A/D
4129K–CAN–01/05