PC4SD21YXPCF Sharp Microelectronics, PC4SD21YXPCF Datasheet - Page 12

• Manufacturer Part Number: PC4SD21YXPCF
• Description: PHOTOCOUPLER 800V 5MA GW 6-SMD
• Manufacturer: Sharp Microelectronics

Specifications of PC4SD21YXPCF

• Voltage - Isolation: 5000Vrms
• Number Of Channels: 1
• Voltage - Off State: 800V
• Output Type: AC, Triac, Zero Cross
• Current - Gate Trigger (igt) (max): 5mA
• Current - Hold (ih): 100µA
• Current - Dc Forward (if): 50mA
• Current - Output / Channel: 100mA
• Mounting Type: Surface Mount
• Package / Case: 6-SMD
• No. Of Channels: 1
• Input Current: 20mA
• Output Voltage: 800V
• Opto Case Style: SMD
• No. Of Pins: 6
• Approval Bodies: CSA
• Approval Category: UL Recognised
• External Depth: 7.62mm
• External Length /: RoHS Compliant
• Isolation Voltage: 5kV
• Output Device: Triac
• Peak Output Voltage (vdrm): 800 V
• Maximum Input Voltage: 1.4 V
• Maximum Output Voltage: 560 VAC
• Minimum Trigger Current: 5 mA (Max)
• Configuration: 1
• Maximum Continuous Output Current: 100 mA
• Maximum Input Current: 50 mA
• Maximum Operating Temperature: + 100 C
• Maximum Reverse Diode Voltage: 6 V
• Maximum Turn-on Time: 50 us
• Minimum Operating Temperature: - 30 C
• Mounting Style: SMD/SMT
• Typical Input Voltage: 1.2 V
• Zero-crossing Circuit: Yes
• Zero-crossing Voltage: 20 V
• Optocoupler Output Type: Phototriac
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 425-2537-2

● Cleaning instructions
● Presence of ODC
Solvent cleaning :
Ultrasonic cleaning :
Recommended solvent materials :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
12
PC4SD21NTZ Series
Sheet No.: D2-A07901EN