NHD-0216HZ-FL-GBW Newhaven Display, NHD-0216HZ-FL-GBW Datasheet - Page 8

• Manufacturer Part Number: NHD-0216HZ-FL-GBW
• Description: LCD MOD CHAR 2X16 Y/G TRANSFL
• Manufacturer: Newhaven Display
• Series: NHD-0216HZ-Fr

Specifications of NHD-0216HZ-FL-GBW

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transflective
• Number Of Digits/alpha: 32
• Outline L X W X H: 65.50mm x 36.70mm x 13.50mm
• Viewing Area: 54.00mm L x 14.40mm W
• Backlight: LED - Yellow/Green
• Display Format: 16 x 2
• Character Size: 4.99mm H x 2.55mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 5.0V
• Dot Size: 0.47mm W x 0.58mm H
• Operating Temperature: -20°C ~ 70°C
• Character Count X Line: 16 x 2
• Module Size (w X H X T): 65.5 mm x 36.7 mm x 13.5 mm
• Fluid Type: STN
• Background Color: Gray
• Voltage Rating: 5 V
• Operating Temperature Range: - 20 C to + 70 C
• Backlight Type: LED Yellow / Green
• Interface: Parallel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Shifting of right/left cursor position or display without writing or reading of display data.
This instruction is used to correct or search display data.
During 2-line mode display, cursor moves to the 2nd line after the 40th digit of the 1st line.
Note that display shift is performed simultaneously in all the lines.
When display data is shifted repeatedly, each line is shifted individually.
When display shift is performed, the contents of the address counter are not changed.
Shift patterns according to S/C and R/L bits
When DL=“High”, it means 8-bit bus mode with MPU.
When DL=“Low”, it means 4-bit bus mode with MPU. Hence, DL is a signal to select 8-bit or 4-bit bus
mode.
When 4-but bus mode, it needs to transfer 4-bit data twice.
When N=“Low”, 1-line display mode is set.
When N=“High”, 2-line display mode is set.
When F=“Low”, 5x8 dots format display mode is set.
When F=“High”, 5x11 dots format display mode.
Set CGRAM address to AC.
The instruction makes CGRAM data available from MPU.
Set DDRAM address to AC.
This instruction makes DDRAM data available form MPU.
When 1- line display mode (N=LOW), DDRAM address is form “00H” to “4FH”.In 2-line display mode
(N=High), DDRAM address in the 1st line form “00H” to “27H”, and DDRAM address in the 2nd line is
Newhaven Display International, LLC
6) Function set
7) Set CGRAM address
8) Set DDRAM address
S/C
DL: Interface data length control bit
N: Display line number control bit
F: Display line number control bit
0
0
1
1
RS
RS
RS
0
0
0
R/L
0
1
0
1
R/W
R/W
R/W
0
0
0
Shift cursor to the left, AC is decreased by 1
Shift cursor to the right, AC is increased by 1
Shift all the display to the left, cursor moves according to the display
Shift all the display to the right, cursor moves according to the display
DB7
DB7
DB7
0
0
1
AC6
DB6
DB6
DB6
0
1
AC5
AC5
DB5
DB5
DB5
1
7/9
AC4
AC4
DB4
DB4
DB4
DL
Operation
AC3
AC3
DB3
DB3
DB3
N
AC2
AC2
DB2
DB2
DB2
F
AC1
AC1
DB1
DB1
DB1
-
AC0
AC0
DB0
DB0
DB0
-