ZENETSC0100ZACG Zilog, ZENETSC0100ZACG Datasheet - Page 4

• Manufacturer Part Number: ZENETSC0100ZACG
• Description: KIT ACC ETHERNET SMART CABLE
• Manufacturer: Zilog

Specifications of ZENETSC0100ZACG

• Accessory Type: Ethernet Smart Cable
• For Use With/related Products: Z8 Encore!®, Z8 Encore! XP®, eZ80Acclaim!®, ZNEO™ Dev Boards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4661

Page 4
Ethernet Smart Cable
User Manual
3. Start ZDS II.
4. Open one of the projects listed in the samples directory of your ZDS II installation.
5. Select
6. Select the
7. In the
8. Click the
9. Click the
You can now connect the target board to the Ethernet Smart Cable as described in “Con-
necting to the Target Board” on page 11.
Connecting the Ethernet Smart Cable Directly to a Host PC
When using a host PC that is not network-connected, you must configure the PC as fol-
lows to connect it to the Ethernet Smart Cable.
1. Power on your host PC before proceeding.
2. Use the Ethernet crossover cable supplied with the Ethernet Smart Cable to connect
3. Connect the 5VDC power supply to the Ethernet Smart Cable power connector.
4. On the host PC, open the Windows Control Panel and double-click the
Installing the Ethernet Smart Cable
Note:
Note:
Available
Your project is now configured to run with the newly installed Ethernet Smart Cable.
the Ethernet Smart Cable to the host PC’s Ethernet port.
The green PWR and RUN LEDs illuminate (see Figure 1). The green link LED on the
Ethernet Smart Cable RJ-45 cable (see Figure 2) will illuminate, indicating a live
Ethernet connection. The green activity LED on the Ethernet Smart Cable RJ-45 con-
nector (see Figure 2) will flicker, indicating network activity.
Internet Connections
Debug Tool
Project –› Settings
If you have more than one Ethernet Smart Cable, you can uniquely identify
them by comparing the MAC address listed in the Smart Cables Available list
with the label on the bottom of the Ethernet Smart Cable.
The following instructions are for the MS Windows XP platform. If your Win-
dows operating system is different, please refer to your MS Windows OS
online help for details.
Setup
list. Check the box for your Ethernet Smart Cable, then click the
OK
Debugger
button in the Project Settings window.
button. Your Ethernet Smart Cable will be listed in the
drop-down menu, select
tab.
icon. The
. The
Project Settings
Network Connections
EthernetSmartCable
window appears.
dialog box appears (Figure 3).
.
UM020701-0506
Network and
Smart Cables
OK
button.