CDB5560 Cirrus Logic Inc, CDB5560 Datasheet - Page 25

• Manufacturer Part Number: CDB5560
• Description: DEV BOARD FOR CS5560 W/MUX
• Manufacturer: Cirrus Logic Inc
• Type: A/Dr

Specifications of CDB5560

• Number Of Adc's: 1
• Number Of Bits: 24
• Sampling Rate (per Second): 50k
• Data Interface: Serial
• Inputs Per Adc: 1 Differential
• Input Range: ±3 V
• Power (typ) @ Conditions: 90mW @ 2.5 V
• Voltage Supply Source: Dual ±
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: CS5560
• Product: Data Conversion Development Tools
• Conversion Rate: 50 KSPS
• Resolution: 24 bit
• Maximum Clock Frequency: 16 MHz
• Interface Type: SPI
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): - 2.5 V
• For Use With/related Products: CS5560
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1273; CDB5560-1

3.11 Power Supplies & Grounding
The CS5560 can be configured to operate with its analog supply operating from 5V, or with its analog sup-
plies operating from ±2.5V. The digital interface supports digital logic operating from either 1.8V, 2.5V, or
3.3V.
Figure 6
illustrates the device configured to operate from 5V analog.
To maximize converter performance, the analog ground and the logic ground for the converter should be
connected at the converter. In the dual analog supply configuration, the analog ground for the ±2.5V sup-
plies should be connected to the VLR pin at the converter with the converter placed entirely over the an-
alog ground plane.
In the single analog supply configuration (+5V), the ground for the +5V supply should be directly tied to
the VLR pin of the converter with the converter placed entirely over the analog ground plane. Refer to
Figure 7
DS713PP2
on page 17 illustrates the device configured to operate from ±2.5V analog.
on page 18.
5/4/09
Figure 7
CS5560
on page 18
25